jcb -MS-210C Instructions & User's Manual page 10

Attention: Laser radiation
Do not stare into the beam
Class 2 laser
Protect yourself and your environment
from accidents using suitable precau-
tionary measures!
Do not look directly into the laser beam
with unprotected eyes.
Never look into the path of the beam.
Never point the laser beam towards
reflecting surfaces and persons or animals.
Even a laser beam with a low output can
cause damage to the eyes.
Caution - methods other than those
specified here can result in dangerous
radiation exposure.
Never open the laser module. Unexpected
exposure to the beam can occur.
If the mitre saw is not used for an extended
period of time, the batteries should be
removed.
The laser may not be replaced with a
different type of laser.
Repairs of the laser may only be carried out
by the laser manufacturer or an authorised
representative
10
.
JCB-MS-210C
Instruction & User Manual