TrekStor DataStation MAXI Z.UL User Manual page 40

3.3) Modes of the TrekStor NDAS Device Management
If you right-click on the "t
the Info area of the task bar, the status of the
z.ul
is shown by means of different colored symbols.
DataStation maxi z.ul
A
below gives you an overview of the different modes.
Color
Green
Blue
Red
Gray
White
Black
EN
Yellow
s
rek tor
Status Mode / meaning
Read access
The PC has read access to the
DataStation maxi z.ul
Read / Write access
The PC has read and write access to the
DataStation maxi z.ul
In an aggregation or mirroring, the
DataStation maxi z.ul
DataStation.
Error
Error in the initialization of the
DataStation maxi z.ul
software problem).
Note: Try to remedy the error by turning the
DataStation maxi z.ul
Deactivated
DataStation maxi z.ul
The
mounted on your PC or on any other PCs in the
network.
Deactivated / active
DataStation maxi z.ul
The
deactivated on your PC, but activated on other
PCs in the network.
No connection
DataStation maxi z.ul
The
connected.
Note: Make sure that all cables are connected
properly and / or that your antivirus / firewall
software is not interfering with the connection.
Mounted
DataStation maxi z.ul
The
mounted as a secondary DataStation in an
aggregation or mirroring.
ndAs d m
eviCe AnAgement
DataStation maxi
can be in various modes. The table
– 40 –
" symbol in
.
.
is the primary
(hardware/
on and off.
is not
is
is not
is