Bosch MS 6 Manual page 22

2 | Technical Data
22 / 76
Harness connectors
Bosch automotive connectors are not available as complete set of components, so Bosch
Motorsport itself offers such a package. For more technical details please check Bosch-
connector homepage, 196 pins
http://www.bosch-connectors.com/bogscoca/category/142
MS 6 harness connector type A (105 con-
tacts), coding variant 1
MS 6 harness connector type K ( 91 con-
tacts), coding variant 1
Protection Classification
Temperature range
Shakeproofed
Wiring diameter
Pinsize
Dummy Plug
Dummy plug 1 928 405 459 for unused con-
nections
Dummy plug 1 928 405 460 for unused con-
nections
Dummy plug 1 928 301 207
Tools and Contacts
Tool Matrix
1928498212 Matrix 1.2
1928498213 Matrix 1.2
1928498837 1928498840
Wiring
Bosch Motorsport recommends using the specified cable material and harness layout for
automotive connectors and wiring applications.
For Ethernet and USB connection CAT5 specified material is recommended and the pairs
and shield connections have to be strictly respected as shown in the wiring diagram.
For USB, the maximum wiring length is limited to 3 m and it is not allowed to be included
into a common harness and also there is no interruption allowed.
Due to installation condition, the length may have to be reduced.
Keep network wiring in distance to main sources of electrical noise like coils, coil- and HP-
injector wirings and also in distance to any telemetry transmitter.
Engine_Control_Unit_MS_6.x_Manual
F 02U B00 712-01
F 02U B00 711-01
IP X6K, X8, X9K
-40 to 120°C
Max. 3.4 g
0.35 to 2.5 mm²
1.2 mm; 2.8 mm
Matrix 1.2 / CB / 0.75 to 1.0 mm²
Matrix 1.2 / CB / 1.0 - 1.5 mm²
BTL 2.8
Contact Wire size
Clean Body 0.35 to 0.5 mm²
1928.498.991
Clean Body 0.75 to 1.0 mm²
1928.498.992
BTL 2.8 1928.498.651 1.5 to 2.5 mm²
Bosch Motorsport