Using The Measurement Sheets - Bosch MS 6 Manual

Bosch Motorsport
Base of the data list are the function- and measure labels, described in details in the func-
tion description.
– To assist the discovery of relevant labels, data list may be graduated.
– Description and label symbol explain the task of the data label.
– Structure of Bosch Motorsport Labels shall communicate recognition values.
CWxxx
CWDAMCAL
CWDAMCAL_FL
dam_xx
dam_fl
udam_xx
DAM_XX_YY
DAM_FL_GRD

8.2 Using the Measurement Sheets

– When RaceCon is online, press "F11" key to switch from Design Mode into Race
Mode.
– The measurement sheet is extended to full screen.
– Switch between different sheets using the tabs at the bottom of the page or the key-
board shortcuts associated with the sheets.
– Press ESC key to return to Design Mode.
Engine_Control_Unit_MS_6.x_Manual
Online Measurement and Calibration | 8
Code-Word starts an action for the function
Code-Word damper travel adjustment
"True" sets the actual measure values of all
dampers to 0
Code-Word damper front left adjustment,2-
point sensor calibration added by offset ad-
justment for each single damper
measure values are always typed in small
letters
damper position front left
voltage values starts always with "u", the
value represents the sensor signal
Data Label are always typed in big letters
Gradient for damper travel sensor, front left,
values are available from sensor manufac-
turer
69 / 76