Shuttle Mainboard EMI Test Statement
Shuttle mainboards have been through EMI tests according to the following series of regulations:
EN55022/CISPR22/AS/NZS3548 Class B, EN55024 (1998/AS/NZS), EN4252.1 (1994), EN61000,
ANSI C63.4 (1992), CFR47 Part 15 Subpart B, and CNS13438 (1997). The items tested are
illustrated as follows:
(A) Voltage: AC 110V/60HZ & AC 230V/50HZ
(B) Tested Product Information:
Product Name: PC Mainboard
Status: Sample
Model Name: SD39P2
S/N: N/A
CPU:
Intel Pentium 4, LGA 775 Core2 Extreme X6800 Conroe 2.93 GHz
FSB 1066 4M L2 cache B1 stepping
USB 2.0 Port: eight ports with 4 pins respectively
1394 Port: one ports with 4 pins and one ports with 6 pins respectively
LAN Port: one port with 8 pins (10Mbps/100Mbps/1000Mbps)
Line-Out Ports: four ports
Front-Out Port: one port
Mic-In Ports: one port
Line-In Ports: one port
SPDIF-Out (Coaxial) Port: one port
SPDIF-Out (Optical) Port: one port
SPDIF-In (Optical) Port: one port
Clear CMOS button: one port
DIMM Memory (optional): DDR2 533/667 2GBx4
Power Cable: Detachable and Shielded (with a GND pin)
External Serial-ATA II Port: one port with 7 pins
All CPUs have completely been tested, and values offered by the worst EMI combination of
CPU external frequency are listed as follows:
Test Mode
External Frequency
1
2
1066MHz
1066MHz
CPU
Conroe 2.93 GHz
Conroe 2.93 GHz
CPU Open/Close
Close
Open
Need help?
Do you have a question about the XPC SD39P2 and is the answer not in the manual?