Table of Contents
Advertisement
2. Test mode
Note: Do not perform the menu item unless explained here. (It may damage the internal data and
camera becomes unusable.)
2-1. Booting
To boot the test mode;
Turn the camera on while pressing DISP and MENU buttons.
To boot MENU1
Press PREVEIW
To boot MENU2
Press FLASH
* To execute
Use + or – keys to select a test item then press shutter button to execute it.
To boot MENU3
Press SELF
2-2. Item for testing
1 TEST MODE
TEST MODE
PROG
99.08.16.13.38
GMENU
99.07.12.15.04
LOADER
ADJ
MOTOR
POWER
CCD ADJ1
CCD ADJ2
STROBE ADJ
ZOOM ADJ
FOCUS ADJ
2 MENU1
MENU1
1.
INIT.NTSC JAPANESE
2.
LED+SUBLCD
3.
INIT.NTSC ENGLISH
4.
CROSS HATCH
5.
ANG DET CHECK
6.
INIT.PAL ENGLISH
7.
COLOR BAR
8.
50PERCENT GRAY
PREVEIW
MENU keys in order rapidly.
FLASH
MENU keys in order rapidly.
SELF
MENU keys in order rapidly.
• TEST MODE
• PROGRAM Version
• Graphic Menu Version
• Loader Version
0X00000007
• ADJ Version
• Motor MCU Version
0X0000011A
• Power MCU Version
0X1A
• CCD ADJUST 1 (Yes/No/NG)
YES
• CCD ADJUST 2 (Yes/No/NG)
YES
• STROBE ADJUST (Yes/No/NG)
YES
• ZOOM ADJUST (Yes/No/NG)
YES
• FOCUS ADJUST (Yes/No/NG)
YES
— 9 —
Shown in green if all the adjustments
have been done.
YES when adjustments are completed.
NO when adjustments are incomplete.
NG if adjustments are failed.
Advertisement
Table of Contents
