Table of Contents
Advertisement
1-3. Upgrading procedure using the PC link cable
(1) Turn the camera off and extract CompactFlash card.
(2) Connect PC link cable.
(3) Boot the transmission program (FLOAD.EXE).
(4) Choose program file ( _ROM.BIN) or graphic menu file ( _GMENU.BIN).
(5) Select data transmission speed (115K/57K/38K).
(If errors occur, lower the transmission speed.)
(6) Click Progress button.
(7) Connect an AC adaptor on the camera and turn the camera on.
(8) Data transmission starts.
(9) Data transmission is completed normally when Status box shows "program complete."
(10) Disconnect AC adaptor plug (cannot be turned off by the power switch).
(11) Change the CompactFlash card with one for shooting.
(12) Boot the test mode and confirm the version.
Turn the camera on while pressing DISP and MENU buttons.
(13) Shoot a picture and confirm the camera function (shooting and playback.)
— 8 —
Advertisement
Table of Contents
