Test Mode; Booting; Item For Testing - Casio QV-3500EX Service Manual & Parts Catalogue

2. Test mode

Note: Do not perform the menu item unless explained here. (It may damage the internal data and
camera becomes unusable.)

2-1. Booting

To boot the test mode;
Turn the camera on while pressing SHIFT and MENU buttons.
To boot MENU1
Press SHIFT
To boot MENU2
Press FLASH
To boot MENU3
Press SELF
* To execute
Use + or – keys to select a test item then press shutter button to execute it.

2-2. Item for testing

1 TEST MODE
• CCD ADJUST 1 (Yes/No/Ng/Err)
• CCD ADJUST 2 (Yes/No/Ng/Err)
• CCD ADJUST 3 (Yes/No/Ng/Err)
NOTE:
YES: When adjustments are completed. (Normal value)
NG: When adjustments are incompleted. (Abnormal value)
NO: IF adjustments are failed.
ERR: EEPROM Read Error
"NO" and "ERR" are designated as purple, "NG" as red.
"TEST MODE" is designated as green when adjustments are all completed.
"IRDA OK" appears beside TEST MODE TITLE when IRDA Master TEST is completed.
SHIFT MENU keys in order rapidly.
FLASH MENU keys in order rapidly.
SELF MENU keys in order rapidly.
TEST MODE
PROG
GMENU
LOADER
MOTOR
POWER
CCD1 YES
CCD2 YES
CCD3 YES
JAP + EN
01. 03. 08. 10. 37
01. 03. 07. 10. 11
0X00000009
0X00000322
0X27
STROBE YES
KIZU YES
ZOOM YES
FOCUS YES
— 8 —
• TEST MODE (IRDA OK)
• PROGRAM Version
• Graphic Menu Version
• Loader Version
• Motor MCU Version
• Power MCU Version
• STROBE ADJUST (Yes/No/Ng/Err)
• KIZU ADJUST (Yes/No/Ng/Err)
• ZOOM ADJUST (Yes/No/Ng/Err)
• FOCUS ADJUST (Yes/No/Ng/Err)