Table of Contents
Advertisement
1. Program version upgrading
In the camera unit, program and graphic menu are stored.
Please check the version and update it if the version is not updated.
There are two method of program updating; using CompactFlash card or utilizing PC link cable.
Note:
1.
Be sure to use AC adaptor.
PCB D becomes unusable if power down or an error occurs during program transmission.
2.
Unit using a mask cannot update the program.
1-1. How to confirm the program (graphic menu) version
1.
Boot the test mode.
Turn the power on while pressing DISP and MENU buttons simultaneously.
2.
Check the LCD display.
(Example)
TEST MODE
PROG
GMENU
· · · ·
1-2. Upgrading procedure using the CompactFlash card
(1) Copy the latest program ( _ROM.BIN) and graphic menu ( _GMENU.BIN) on a CompactFlash card
then set the CompactFlash card on the camera.
(2) Connect an AC adaptor on the camera.
(3) Boot the test mode.
Turn the power on while pressing DISP and MENU keys simultaneously.
(4) Camera's display shows the followings.
It is normal if two OK's are shown after about 1 minute.
After then, the camera is set on the Camera mode automatically.
SIZE OK 666464
SIZE OK 1305532
(5) Turn the camera off.
(6) Chgange the CompactFlash card with the one for picture taking.
(7) Boot the test mode and confirm the program version.
Turn the power on while pressing DISP and MENU buttons.
(8) Finally, check the camera's function (shooting and playback).
00.
02.
04.
13.
49
99.
12.
27.
18.
12
Program version
Graphic menu version
— 7 —
Advertisement
Table of Contents
