Makita LS1216 Technical Information page 34

W
iring diagram
Fig. D-11
Field lead wires have to be tightened
in the Motor housing so as not to
touch Armature.
Pass Lead wires from Motor housing
through the notch of Handle.
Wind Lead wires to Line filter
one time as illustrated right.
Wiring in Motor housing and Handle for UK 110V
Terminal
block
Field lead wires
* (orange)
* (black)
* (yellow)
Wiring on Line filter
Lead wire (black) for connecting
Main switch and Terminal block
Lead wre (red) for connecting
Controller and Terminal block
Do not put Lead wires on ribs.
Controller
case of Power ribs for Laser
supply circuit switch unit
Pass the Lead wires through the Rib
for Laser switch unit. Do not put
the Lead wires on the Ribs.
Line filter
P 34/ 35
rib