Table of Contents
Advertisement
3
Insert the memory card.
O
•
Be sure card is in the correct orien-
tation; do not insert at an angle or
use force. If the memory card is not
correctly inserted or no memory card
is inserted, a will appear in the LCD
monitor and internal memory will be
used for recording and playback.
•
Holding the card in the orientation
shown, slide it in until it clicks into
2
place at the back of the slot.
4
Holding the battery-chamber cover closed against the camera
A
body (
ing that the cover is secure.
O
•
If the cover does not close, check that
the battery is in the correct orientation.
•
Before closing the cover, confi rm that
there is no dust, sand, or other foreign
matter on the water-resistant seal or
adjacent surfaces.
•
When closing the battery-chamber
cover, do not subject it to excessive
horizontal forces. Failure to observe this
precaution could cause the water-re-
sistant seal to become misaligned, al-
lowing water into the camera.
•
Check that the cover is secure by ro-
tating the latch in the opposite direc-
tion and confi rming that the cover
does not open.
5
Format the memory card (
O
Format memory cards before fi rst use, and be sure to reformat all
memory cards after using them in a computer or other device.
16
), rotate the latch until it clicks into place (
P
111).
B
), indicat-
Advertisement
Table of Contents
