Download Print this page

Advertisement

Quick Links

CAMERA USE
Instructions for the Fuji XP10 Digital Camera
Instructions for the Fuji XP10 Digital C
The Fuji XP10 is flexible and easy to
flexible and easy to use. The camera has been set for
automatic operation which should provide good pictures in all field conditions.
Please do not change any of the settings other than those described
Please do not change any of the settings other than those described
Please do not change any of the settings other than those described
below. Please insert your hand through the camera strap for safekeeping.
below. Please insert your hand through the camera strap for safekeeping.
below. Please insert your hand through the camera strap for safekeeping.
Framing the Picture
Position the main subject in the focus area and use the zoom
Position the main subject in the focus area and use the zoom
buttons to frame the picture in the screen. Press
T to zoom in.
Focusing and Shooting
The camera will focus on whatever you see in the center ofthe
The camera will focus on whatever you see in the center ofthe
screen. Press the shutter button (large button on top of the
camera) halfway down to activate the auto
focus is obtained, two beeps will be heard. Press the button
focus is obtained, two beeps will be heard.
down the rest of the way to take the picture. Make sure you
down the rest of the way to take the picture.
hold the button down until you hear the shutter click. In low
hold the button down until you hear the shutter cl
light, the shutter will be slightly delayed while the scene is
light, the shutter will be slightly delayed while the scene is
illuminated by the automatic flash. In the unlikely event focus
illuminated by the automatic flash. In the unlikely event
is not obtained, a red message "AF!" will appear on the
is not obtained, a red message "AF!" will appear on the
screen. In that case, find another object at the same dista
screen. In that case, find another object at the same distance
from you, press the button half-way down to obtain a focus
on that object, then, while keeping the button pressed half
then, while keeping the button pressed half-
way, move the camera to again view the picture you wish to
take.
Checking the Picture
In order to check the picture, press the review arrow button on the
In order to check the picture, press the
back of the camera. If the picture is satisfactory, note all required
back of the camera. If the picture is satisfactory, note all required
information in the photo log sheet. If not, delete the picture and retake it.
information in the photo log sheet. If not, delete the picture and retake it.
While in this mode, you can move back and forth between the stored pictures
While in this mode, you can move back and forth between the stored pictures
While in this mode, you can move back and forth between the stored pictures
using the right and left sides of the Menu/OK button on the back of the
ing the right and left sides of the Menu/OK button on the back of the
camera. You can also zoom in on a picture you are viewing by using the
You can also zoom in on a picture you are viewing by using the
zoom lever on the upper-right back of the camera.
Press the shutter button to return to shooting mode.
Press the shutter button to return to shooting mode.
Field Procedures
should provide good pictures in all field conditions.
should provide good pictures in all field conditions.
Turning the Camera On and Off
Turning the Camera
Press the small button on
the small button on top and
hold it down until an image
hold it down until
appears on the screen, and the
appears on
blue light comes on. Press the small button again to turn the camera off.
blue light comes on.
the screen. Press W to zoom out or
(large button on top of the
to activate the auto-focus. When
way down to obtain a focus
to again view the picture you wish to
right back of the camera.
Press the small button again to turn the camera off.
1
Double
Double
Beep
Beep
Press
Press the rest of
Halfway
the way down
th
13
Edition, 2011
Click

Advertisement

loading

Summary of Contents for FujiFilm XP10

  • Page 1 Instructions for the Fuji XP10 Digital C Instructions for the Fuji XP10 Digital Camera The Fuji XP10 is flexible and easy to flexible and easy to use. The camera has been set for automatic operation which should provide good pictures in all field conditions.
  • Page 2 REACH MAP Deleting Pictures To delete a picture being viewed, push the top of the Menu/OK button. A message will appear on the screen asking if you wish to erase the picture. To do so, again push the top of the Menu/OK button to select “OK”...
  • Page 3 REACH MAP SETTING MENUS FOR THE FUJI XP10 DIGITAL CAMERA Under normal circumstances, when the camera is turned on it will have already appropriate settings. However, should the settings be changed, the following instructions show how to go through the setting menus and select the proper options.
  • Page 4 REACH MAP Press MENU/OK to display the Shooting Menu. 1. The menu opens with “SHOOTING MODE” highlighted. Press the right selector button to show options. Press the up or down buttons until “SR AUTO” is highlighted. Press OK. 2. Press the down selector button to highlight ISO. Press the right selector button to display options.