Table Of Contents; How Does Marmitek X-10 Work - Marmitek SW12 User Manual

SAFETY WARNINGS
• The wiring of your electrical installation is live (230 V) and extremely dangerous. Never
connect the module when plugged into the mains. Always turn off the main switch before
starting the installation.
• This product is for professional use and should be installed by a certified installer.
• To prevent short circuits, this product should only be used inside and only in dry spaces.
Do not expose the components to rain or moisture. Do not use the product close to a
bath, swimming pool etc.
• Do not expose the components of your systems to extremely high temperatures or bright
light sources.
• In case of improper usage or if you have altered and repaired the product yourself, all
guarantees expire. Marmitek does not accept responsibility in the case of improper usage
of the product or when the product is used for purposes other than specified. Marmitek
does not accept responsibility for additional damage other than covered by the legal
product responsibility.
• This product is not a toy. Keep out of reach of children.
• Do not open the product: the device may contain live parts. The product should only be
repaired or serviced by a qualified expert.
• Automatic switching devices provide comfort, but can also be dangerous. They can
surprise people or can ignite clothing hanging over an electric heat source. Please be
careful and take appropriate measures to avoid accidents.

TABLE OF CONTENTS

HOW DOES MARMITEK X-10 WORK? ____________________________________________ 3
ADRESSES ____________________________________________________________________ 4
SIGNAL RANGE _______________________________________________________________ 4
INTRODUCTION_______________________________________________________________ 6
1. INSTALLATION ______________________________________________________________ 6
2. PROGRAMMING ____________________________________________________________ 7
3. DEFAULT SETTING __________________________________________________________ 8
4. MANUAL CONTROL _________________________________________________________ 8
5. MARMITEK X-10 CONTROL ___________________________________________________ 8
6. FREQENTLY ASKED QUESTIONS _______________________________________________ 9
7. TECHNICAL DATA __________________________________________________________ 10

HOW DOES MARMITEK X-10 WORK?

Marmitek X-10 components use the existing mains wiring to communicate (using Marmitek
X-10 signals). You can build a complete system using the three different kind of components
of the Marmitek X-10 System:
SW12™ 3