Hirschmann iSCOUT expert compact Operator's Manual
  1. Manuals
  2. Brands
  3. Hirschmann Manuals
  4. Music Mixer
  5. iSCOUT expert compact
  6. Operator's manual

Hirschmann iSCOUT expert compact Operator's Manual

Graphics console
Hide thumbs
Table of Contents

Advertisement

Quick Links

iSCOUT
expert compact
Graphics console
Operator's Manual
Issue 8/2008 Rev. C
This document is listed under Order No.
50 650 19 0201e (LinkBelt278)
Contents
General Information
Important Notes
System Description
Configuration Setup
Inspection checks
before start-up
Service and Maintenance
Troubleshooting
Appendix

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the iSCOUT expert compact and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Hirschmann iSCOUT expert compact

Summary of Contents for Hirschmann iSCOUT expert compact

  • Page 1 iSCOUT expert compact Graphics console Contents General Information Important Notes System Description Configuration Setup Inspection checks before start-up Service and Maintenance Troubleshooting Appendix Operator's Manual Issue 8/2008 Rev. C This document is listed under Order No. 50 650 19 0201e (LinkBelt278)

  • Page 2: Table Of Contents

    Malfunction Table ..............45 Appendix: Menu overview calibration menus ......50 Appendix: Important Instructional Notes........53 © 2008 HIRSCHMANN Automation and Control GmbH · Branch Office Ettlingen · eMail: info.ecs@hirschmann.de · www.hirschmann-usa.com 50 650 19 0201e_Rev C (LinkBelt278).doc / 2008-08-18 / Rev. C / rk...

  • Page 3: General Information

    CAN bus. The manufacturer reserves the right to modify the contents of this manual without notice. Hirschmann offers no guarantee whatsoever for this material, including guarantees with reference to commercial availability and suitability for particular appli- cations.

  • Page 4: Important Notes

    © 2008 HIRSCHMANN Automation and Control GmbH · Branch Office Ettlingen · eMail: info.ecs@hirschmann.de · www.hirschmann-usa.com 50 650 19 0201e_Rev C (LinkBelt278).doc / 2008-08-18 / Rev. C / rk...

  • Page 5: System Description

    © 2008 HIRSCHMANN Automation and Control GmbH · Branch Office Ettlingen · eMail: info.ecs@hirschmann.de · www.hirschmann-usa.com 50 650 19 0201e_Rev C (LinkBelt278).doc / 2008-08-18 / Rev. C / rk...

  • Page 6: System Function

    In the event of a disruption, a corresponding error code "E##" will appear on the Data dis- play (1). (> refer to error code table) © 2008 HIRSCHMANN Automation and Control GmbH · Branch Office Ettlingen · eMail: info.ecs@hirschmann.de · www.hirschmann-usa.com 50 650 19 0201e_Rev C (LinkBelt278).doc / 2008-08-18 / Rev. C / rk...

  • Page 7: Operator's Console

    The background illumination of the operating elements and the LC display is manually adjustable in accordance with present light levels. © 2008 HIRSCHMANN Automation and Control GmbH · Branch Office Ettlingen · eMail: info.ecs@hirschmann.de · www.hirschmann-usa.com 50 650 19 0201e_Rev C (LinkBelt278).doc / 2008-08-18 / Rev. C / rk...

  • Page 8: Displays And Operating Elements

    "TARE" pushbutton "LMI override" warning light Rotary selection wheel with push button © 2008 HIRSCHMANN Automation and Control GmbH · Branch Office Ettlingen · eMail: info.ecs@hirschmann.de · www.hirschmann-usa.com 50 650 19 0201e_Rev C (LinkBelt278).doc / 2008-08-18 / Rev. C / rk...
  • Page 9 A detailed description of the symbols and displays can be found both in the individual chapters and in the Appendix to this manual. © 2008 HIRSCHMANN Automation and Control GmbH · Branch Office Ettlingen · eMail: info.ecs@hirschmann.de · www.hirschmann-usa.com 50 650 19 0201e_Rev C (LinkBelt278).doc / 2008-08-18 / Rev. C / rk...
  • Page 10 The load-moment-increasing crane movements are switched off at the same time. © 2008 HIRSCHMANN Automation and Control GmbH · Branch Office Ettlingen · eMail: info.ecs@hirschmann.de · www.hirschmann-usa.com 50 650 19 0201e_Rev C (LinkBelt278).doc / 2008-08-18 / Rev. C / rk...
  • Page 11 "ESC (Escape)" key Push button for returning to the normal LMI display © 2008 HIRSCHMANN Automation and Control GmbH · Branch Office Ettlingen · eMail: info.ecs@hirschmann.de · www.hirschmann-usa.com 50 650 19 0201e_Rev C (LinkBelt278).doc / 2008-08-18 / Rev. C / rk...
  • Page 12 Display errors can be caused by the effects of environmental influences such as wind on the boom or the load. © 2008 HIRSCHMANN Automation and Control GmbH · Branch Office Ettlingen · eMail: info.ecs@hirschmann.de · www.hirschmann-usa.com 50 650 19 0201e_Rev C (LinkBelt278).doc / 2008-08-18 / Rev. C / rk...
  • Page 13 < show LMI value screen < show service menu (code required) < show CAN-bus menu © 2008 HIRSCHMANN Automation and Control GmbH · Branch Office Ettlingen · eMail: info.ecs@hirschmann.de · www.hirschmann-usa.com 50 650 19 0201e_Rev C (LinkBelt278).doc / 2008-08-18 / Rev. C / rk...

  • Page 14: Description Of The Status Symbols

    • blinking: work area limits exceeded (⇒ see chapter 4.3.4.2) © 2008 HIRSCHMANN Automation and Control GmbH · Branch Office Ettlingen · eMail: info.ecs@hirschmann.de · www.hirschmann-usa.com 50 650 19 0201e_Rev C (LinkBelt278).doc / 2008-08-18 / Rev. C / rk...

  • Page 15: Configuration Setup

    "OK" key in the confirmation screens (pro- vided that the crane configuration has not been modified) © 2008 HIRSCHMANN Automation and Control GmbH · Branch Office Ettlingen · eMail: info.ecs@hirschmann.de · www.hirschmann-usa.com 50 650 19 0201e_Rev C (LinkBelt278).doc / 2008-08-18 / Rev. C / rk...
  • Page 16 The procedure is completed after this confirmation, and the crane menu is displayed. © 2008 HIRSCHMANN Automation and Control GmbH · Branch Office Ettlingen · eMail: info.ecs@hirschmann.de · www.hirschmann-usa.com 50 650 19 0201e_Rev C (LinkBelt278).doc / 2008-08-18 / Rev. C / rk...

  • Page 17: Interactive Operating Mode Setup

    Select the soft function key and actuate the rotary wheel button (from the LMI screen) © 2008 HIRSCHMANN Automation and Control GmbH · Branch Office Ettlingen · eMail: info.ecs@hirschmann.de · www.hirschmann-usa.com 50 650 19 0201e_Rev C (LinkBelt278).doc / 2008-08-18 / Rev. C / rk...
  • Page 18 +fixed jib boom sion head tip extension © 2008 HIRSCHMANN Automation and Control GmbH · Branch Office Ettlingen · eMail: info.ecs@hirschmann.de · www.hirschmann-usa.com 50 650 19 0201e_Rev C (LinkBelt278).doc / 2008-08-18 / Rev. C / rk...
  • Page 19 © 2008 HIRSCHMANN Automation and Control GmbH · Branch Office Ettlingen · eMail: info.ecs@hirschmann.de · www.hirschmann-usa.com 50 650 19 0201e_Rev C (LinkBelt278).doc / 2008-08-18 / Rev. C / rk...
  • Page 20 © 2008 HIRSCHMANN Automation and Control GmbH · Branch Office Ettlingen · eMail: info.ecs@hirschmann.de · www.hirschmann-usa.com 50 650 19 0201e_Rev C (LinkBelt278).doc / 2008-08-18 / Rev. C / rk...
  • Page 21 © 2008 HIRSCHMANN Automation and Control GmbH · Branch Office Ettlingen · eMail: info.ecs@hirschmann.de · www.hirschmann-usa.com 50 650 19 0201e_Rev C (LinkBelt278).doc / 2008-08-18 / Rev. C / rk...
  • Page 22 (as defined above) active pick point is marked with a flashing symbol © 2008 HIRSCHMANN Automation and Control GmbH · Branch Office Ettlingen · eMail: info.ecs@hirschmann.de · www.hirschmann-usa.com 50 650 19 0201e_Rev C (LinkBelt278).doc / 2008-08-18 / Rev. C / rk...
  • Page 23 DELETE entries, renew setup < Quick change hoist OK, if all entries are correct © 2008 HIRSCHMANN Automation and Control GmbH · Branch Office Ettlingen · eMail: info.ecs@hirschmann.de · www.hirschmann-usa.com 50 650 19 0201e_Rev C (LinkBelt278).doc / 2008-08-18 / Rev. C / rk...
  • Page 24 (as defined above) active pick point is marked with a flashing symbol © 2008 HIRSCHMANN Automation and Control GmbH · Branch Office Ettlingen · eMail: info.ecs@hirschmann.de · www.hirschmann-usa.com 50 650 19 0201e_Rev C (LinkBelt278).doc / 2008-08-18 / Rev. C / rk...

  • Page 25: Programming Geometrical Limits

    > 4.3.3 edit slewing angle limit / > 4.3.4 virtual wall © 2008 HIRSCHMANN Automation and Control GmbH · Branch Office Ettlingen · eMail: info.ecs@hirschmann.de · www.hirschmann-usa.com 50 650 19 0201e_Rev C (LinkBelt278).doc / 2008-08-18 / Rev. C / rk...

  • Page 26: Radius Limitation

    >> © 2008 HIRSCHMANN Automation and Control GmbH · Branch Office Ettlingen · eMail: info.ecs@hirschmann.de · www.hirschmann-usa.com 50 650 19 0201e_Rev C (LinkBelt278).doc / 2008-08-18 / Rev. C / rk...
  • Page 27 © 2008 HIRSCHMANN Automation and Control GmbH · Branch Office Ettlingen · eMail: info.ecs@hirschmann.de · www.hirschmann-usa.com 50 650 19 0201e_Rev C (LinkBelt278).doc / 2008-08-18 / Rev. C / rk...

  • Page 28: Tip Height Limitation

    >> © 2008 HIRSCHMANN Automation and Control GmbH · Branch Office Ettlingen · eMail: info.ecs@hirschmann.de · www.hirschmann-usa.com 50 650 19 0201e_Rev C (LinkBelt278).doc / 2008-08-18 / Rev. C / rk...
  • Page 29 Switch height limit on/off store actual boom tip height as maximum height limit © 2008 HIRSCHMANN Automation and Control GmbH · Branch Office Ettlingen · eMail: info.ecs@hirschmann.de · www.hirschmann-usa.com 50 650 19 0201e_Rev C (LinkBelt278).doc / 2008-08-18 / Rev. C / rk...

  • Page 30: Boom Angle Limitation

    Note: The 0.0°value displayed indicates a maximum and/or minimum limit has not been programmed. © 2008 HIRSCHMANN Automation and Control GmbH · Branch Office Ettlingen · eMail: info.ecs@hirschmann.de · www.hirschmann-usa.com 50 650 19 0201e_Rev C (LinkBelt278).doc / 2008-08-18 / Rev. C / rk...
  • Page 31 © 2008 HIRSCHMANN Automation and Control GmbH · Branch Office Ettlingen · eMail: info.ecs@hirschmann.de · www.hirschmann-usa.com 50 650 19 0201e_Rev C (LinkBelt278).doc / 2008-08-18 / Rev. C / rk...

  • Page 32: Slewing Angle Limitation / Virtual Wall Definition

    >> © 2008 HIRSCHMANN Automation and Control GmbH · Branch Office Ettlingen · eMail: info.ecs@hirschmann.de · www.hirschmann-usa.com 50 650 19 0201e_Rev C (LinkBelt278).doc / 2008-08-18 / Rev. C / rk...
  • Page 33 © 2008 HIRSCHMANN Automation and Control GmbH · Branch Office Ettlingen · eMail: info.ecs@hirschmann.de · www.hirschmann-usa.com 50 650 19 0201e_Rev C (LinkBelt278).doc / 2008-08-18 / Rev. C / rk...
  • Page 34 / virtual wall >> © 2008 HIRSCHMANN Automation and Control GmbH · Branch Office Ettlingen · eMail: info.ecs@hirschmann.de · www.hirschmann-usa.com 50 650 19 0201e_Rev C (LinkBelt278).doc / 2008-08-18 / Rev. C / rk...
  • Page 35 The symbol will blink, if the virtual wall is reached or exceeded. >> © 2008 HIRSCHMANN Automation and Control GmbH · Branch Office Ettlingen · eMail: info.ecs@hirschmann.de · www.hirschmann-usa.com 50 650 19 0201e_Rev C (LinkBelt278).doc / 2008-08-18 / Rev. C / rk...
  • Page 36 (up to 5 virtual walls) delete all existing walls © 2008 HIRSCHMANN Automation and Control GmbH · Branch Office Ettlingen · eMail: info.ecs@hirschmann.de · www.hirschmann-usa.com 50 650 19 0201e_Rev C (LinkBelt278).doc / 2008-08-18 / Rev. C / rk...

  • Page 37: Pre-Operational Inspection

    4. Inspection of the mechanical and electrical installation of power measurement sockets on the lattice extensions (if present). © 2008 HIRSCHMANN Automation and Control GmbH · Branch Office Ettlingen · eMail: info.ecs@hirschmann.de · www.hirschmann-usa.com 50 650 19 0201e_Rev C (LinkBelt278).doc / 2008-08-18 / Rev. C / rk...
  • Page 38 9. Check the load display by lifting a load of known weight. The accuracy of the load display must be within the tolerance range. © 2008 HIRSCHMANN Automation and Control GmbH · Branch Office Ettlingen · eMail: info.ecs@hirschmann.de · www.hirschmann-usa.com 50 650 19 0201e_Rev C (LinkBelt278).doc / 2008-08-18 / Rev. C / rk...

  • Page 39: Operation

    Any structural modifications or changes to the crane shall require re-verification of the crane's LMI calibration. © 2008 HIRSCHMANN Automation and Control GmbH · Branch Office Ettlingen · eMail: info.ecs@hirschmann.de · www.hirschmann-usa.com 50 650 19 0201e_Rev C (LinkBelt278).doc / 2008-08-18 / Rev. C / rk...

  • Page 40: Service And Maintenance

    Malfunction Table, but they are not permitted to replace any defective mechanical or electrical parts or cables. © 2008 HIRSCHMANN Automation and Control GmbH · Branch Office Ettlingen · eMail: info.ecs@hirschmann.de · www.hirschmann-usa.com 50 650 19 0201e_Rev C (LinkBelt278).doc / 2008-08-18 / Rev. C / rk...

  • Page 41: Info / Service Menus

    < switch to 2 level ▼ Info screen LMI < return to main menu © 2008 HIRSCHMANN Automation and Control GmbH · Branch Office Ettlingen · eMail: info.ecs@hirschmann.de · www.hirschmann-usa.com 50 650 19 0201e_Rev C (LinkBelt278).doc / 2008-08-18 / Rev. C / rk...
  • Page 42 < to System Info node 2 (iFLEX5 central unit) < to calibration menu (access code required) © 2008 HIRSCHMANN Automation and Control GmbH · Branch Office Ettlingen · eMail: info.ecs@hirschmann.de · www.hirschmann-usa.com 50 650 19 0201e_Rev C (LinkBelt278).doc / 2008-08-18 / Rev. C / rk...
  • Page 43 < to info screen digital inputs < to info screen digital outputs © 2008 HIRSCHMANN Automation and Control GmbH · Branch Office Ettlingen · eMail: info.ecs@hirschmann.de · www.hirschmann-usa.com 50 650 19 0201e_Rev C (LinkBelt278).doc / 2008-08-18 / Rev. C / rk...
  • Page 44 < to CAN symbol legend ▼ CAN symbol legend < back to previous menu © 2008 HIRSCHMANN Automation and Control GmbH · Branch Office Ettlingen · eMail: info.ecs@hirschmann.de · www.hirschmann-usa.com 50 650 19 0201e_Rev C (LinkBelt278).doc / 2008-08-18 / Rev. C / rk...

  • Page 45: Troubleshooting

    Internet Support: www.hirschmann-usa.com > ELECTRONIC CONTROL SYSTEMS > Service & Support © 2008 HIRSCHMANN Automation and Control GmbH · Branch Office Ettlingen · eMail: info.ecs@hirschmann.de · www.hirschmann-usa.com 50 650 19 0201e_Rev C (LinkBelt278).doc / 2008-08-18 / Rev. C / rk...

  • Page 46: Malfunction Table

    Below lower limit value in measuring channel "force luffing jib left" © 2008 HIRSCHMANN Automation and Control GmbH · Branch Office Ettlingen · eMail: info.ecs@hirschmann.de · www.hirschmann-usa.com 50 650 19 0201e_Rev C (LinkBelt278).doc / 2008-08-18 / Rev. C / rk...
  • Page 47 "main boom tip angle" has been exceeded (if avail.). © 2008 HIRSCHMANN Automation and Control GmbH · Branch Office Ettlingen · eMail: info.ecs@hirschmann.de · www.hirschmann-usa.com 50 650 19 0201e_Rev C (LinkBelt278).doc / 2008-08-18 / Rev. C / rk...
  • Page 48 • Replace slewing angle the tolerance sensor © 2008 HIRSCHMANN Automation and Control GmbH · Branch Office Ettlingen · eMail: info.ecs@hirschmann.de · www.hirschmann-usa.com 50 650 19 0201e_Rev C (LinkBelt278).doc / 2008-08-18 / Rev. C / rk...
  • Page 49 • • CAN bus delay Replace cable to the A2B switch © 2008 HIRSCHMANN Automation and Control GmbH · Branch Office Ettlingen · eMail: info.ecs@hirschmann.de · www.hirschmann-usa.com 50 650 19 0201e_Rev C (LinkBelt278).doc / 2008-08-18 / Rev. C / rk...
  • Page 50 If a fault message is displayed that is not included in the present list, then please contact your local Hirschmann Customer Service. > www.hirschmann-usa.com < © 2008 HIRSCHMANN Automation and Control GmbH · Branch Office Ettlingen · eMail: info.ecs@hirschmann.de · www.hirschmann-usa.com 50 650 19 0201e_Rev C (LinkBelt278).doc / 2008-08-18 / Rev. C / rk...

  • Page 51: Appendix: Menu Overview Calibration Menus

    © 2008 HIRSCHMANN Automation and Control GmbH · Branch Office Ettlingen · eMail: info.ecs@hirschmann.de · www.hirschmann-usa.com 50 650 19 0201e_Rev C (LinkBelt278).doc / 2008-08-18 / Rev. C / rk...
  • Page 52 ▼ input service code (confirmation screen) OK, confirm selected code ▼ zero-setting force 1 © 2008 HIRSCHMANN Automation and Control GmbH · Branch Office Ettlingen · eMail: info.ecs@hirschmann.de · www.hirschmann-usa.com 50 650 19 0201e_Rev C (LinkBelt278).doc / 2008-08-18 / Rev. C / rk...
  • Page 53 (DWG) abort calibration step © 2008 HIRSCHMANN Automation and Control GmbH · Branch Office Ettlingen · eMail: info.ecs@hirschmann.de · www.hirschmann-usa.com 50 650 19 0201e_Rev C (LinkBelt278).doc / 2008-08-18 / Rev. C / rk...
  • Page 54 © 2008 HIRSCHMANN Automation and Control GmbH · Branch Office Ettlingen · eMail: info.ecs@hirschmann.de · www.hirschmann-usa.com 50 650 19 0201e_Rev C (LinkBelt278).doc / 2008-08-18 / Rev. C / rk...
  • Page 55 • establishing or separating earth connections; • using a guarded shield system. © 2008 HIRSCHMANN Automation and Control GmbH · Branch Office Ettlingen · eMail: info.ecs@hirschmann.de · www.hirschmann-usa.com 50 650 19 0201e_Rev C (LinkBelt278).doc / 2008-08-18 / Rev. C / rk...
  • Page 56 © 2008 HIRSCHMANN Automation and Control GmbH · Branch Office Ettlingen · eMail: info.ecs@hirschmann.de · www.hirschmann-usa.com 50 650 19 0201e_Rev C (LinkBelt278).doc / 2008-08-18 / Rev. C / rk...
  • Page 57 2008-08-18 Description for battery symbols added. Description for confirmation screens added. © 2008 HIRSCHMANN Automation and Control GmbH · Branch Office Ettlingen · eMail: info.ecs@hirschmann.de · www.hirschmann-usa.com 50 650 19 0201e_Rev C (LinkBelt278).doc / 2008-08-18 / Rev. C / rk...

Table of Contents