Quick Smart Features
English
22
Clean function
Use the Clean function to remove moisture from the inside of the air
conditioner for preventing propagation of fungi, bacteria, etc.
In operation
NOTE
Depending on the condition of the indoor unit, the Clean operation
stops after running for 30 seconds to 20 minutes.
To cancel this function, press the
When the Clean function is set, the Timer LED on the indoor unit
cancelled, the Timer LED on the indoor unit blinks once for 1 second
If you turn on the air conditioner and then turn it off within 20
seconds, the Clean function does not operate.
When the air conditioner is turned off, the Clean function operates
immediately. When it is turned on, the Clean function operates after
it is stopped.
Once the Clean function is started, it automatically continues to
operate until it is cancelled.
When the Clean function is set,
remote controller display even when the air conditioner is turned off.
button again.
is displayed on the wired