Table of Contents
Advertisement
Long reach
Use the Long reach function to deliver strong air flow that quickly reaches a far distance.
Clean
Use the Clean function to remove moisture from the inside of the air conditioner for preventing propagation of fungi,
bacteria, etc.
Press the [ Long ] button to select the Long reach function.
To cancel this function, press the [ Long ] button again.
You cannot change the fan speed.
NOTE
If the indoor unit is turned off or does not support the Long reach
function, the
Press and hold the [ Clean ] button for more than 3 seconds.
-
indicator will be displayed.
Depending on the condition of the indoor unit, the Clean operation
stops after running for 30 seconds to 20 minutes.
NOTE
To cancel this function, press the [ Clean ] button again.
When the Clean function is set, the Timer LED on the indoor unit blinks
3times for 3 seconds . (OFF
Return to the previous state). When the Clean function is cancelled, the
Timer LED on the indoor unit blinks once for 1 second. (OFF
OFF
Return to the previous state)
If you turn on the air conditioner and then turn it off within 20 seconds,
the Clean function does not operate.
When the air conditioner is turned off, the Clean function operates
immediately. When it is turned on, the Clean function operates after it
is stopped.
Once the Clean function is started, it automatically continues to operate
until it is cancelled.
When the Clean function is set,
controller display even when the air conditioner is turned off.
ENGLISH-13
indicator appears when you press the [ Long ] button.
ON
OFF
ON
is displayed on the wired remote
OFF
ON
OFF
ON
Hide quick links:
Advertisement
Table of Contents
