Section 3 - Maintenance Instructions; Service - After First 5 Hours; Change Engine Oil; Check Transmission Grease - Snapper ECLP21 551HV Safety Instructions & Operator's Manual

Section 3 - MAINTENANCE
3.1 INTRODUCTION
To retain the quality of the mower, use genuine
SNAPPER replacement parts only. Contact a local
SNAPPER dealer for parts and service assistance.
For the correct part or information for a particular
mower, always mention model and serial number.

3.2 SERVICE - AFTER FIRST 5 HOURS

3.2.1. CHANGE ENGINE OIL

The simplest way to drain the oil is to tilt the mower
on it's side (carburetor side up). Remove the oil fill
cap and allow the oil to drain from the filler tube into
a shallow pan. Refer to the Engine Owner's Manual
for details regarding oil specifications, oil and oil
filter change intervals.
WARNING
DO NOT attempt any maintenance, adjustments or
service with engine and blade running. STOP engine
and blade. Disconnect spark plug wire and secure
away from spark plug. Engine and components are
HOT. Avoid serious burns, allow sufficient time for
all components to cool.
3.2.2. GREASE LEVEL IN TRANSMISSION
The transmission
maintenance. If transmission leaks or malfunctions,
return machine to an authorized Snapper dealer for
repair.
3.2.3. WHEEL DRIVE CONTROL
The wheel drive
adjustment to maintain proper drive function. The
adjustment is performed with the thumb screw
located on the right handle and requires no tools.
Refer to Section "WHEEL DRIVE CONTROL
ADJUSTMENT".
9
requires no lubrication
control requires periodic
or