Emerson Copeland Screw SCH2 Applications Manual page 22

• Select the desired operating conditions:
- Refrigerant and for R407C reference
temperature
- Evaporating temperature
- Without or with economizer
- UCT. gas superheat or suction gas
temperature
- Useful superheat
- Capacity regulator
- Power supply
• Hit Calculate.
In the window Output Data the selected compressor
with performance data is shown.
• Data output:
at this stage an input of individual text (Head line)
is possible.
- Print: Print out at standard printer, with applica-
tion limits (application ranges)
- Export: Output as ASCII file
Operating point in application limits diagram
• Hit Limits.
Standard application limits diagram with operating
point (blue cross) is shown in the window.
Further window: application limits diagram for ECO.
© 2002 Copeland Corporation
Issued 4-2002
Printed in U.S.A.
T T T T T echnical data of a compressor echnical data of a compressor echnical data of a compressor
echnical data of a compressor echnical data of a compressor
• Hit T. Data.
Window Data appears, in which the technical data
are listed.
Further windows:
Dimensions (dimensional drawing and Notes (notes
and legend)
• Export all data with Print (Print-out at standard
printer, or Export (as ASCII file).
Export performance tables
• Hit Tables.
The blank Performance Table is shown in the
window.
• Check the default values (white fields) and change
where necessary.
The Input Values can only be changed in the
window Single Point Calculation.
• Hit Calculate.
The Performance Table is shown in the window.
• Export the data with Print (print-out at standard
printer, Export (as ASCII file) or Copy into the
clipboard).
Copeland is a registered trademark and Copeland
Screw is a trademark of Copeland Corporation. The
Emerson Climate Technologies logo is a trademark and
22
AE4-1322
service mark of Emerson Elelctric Co.