7URXEOHVKRRWLQJ
6\PSWRP
DIAG LED is
flashing
INTERNET
LED is "Off"
$
3RVVLEOH FDXVH
At the moment a CPE
firmware upgrade is
executed.
You cannot connect to
the Internet. The PC
may not be configured
as required or the
network adapter driver
may not fit.
6ROXWLRQ
Wait until the firmware upgrade is passed and
•
the DIAG LED is "On" (wireless enabled).
Check that your PC is properly configured for
•
TCP/IP. (See
Configuring the TCP/IP
protocols on the
PC).
Make sure the correct network adapter driver
•
is installed for your operating system. If
necessary, try reinstalling the driver.
Check that the speed of the network adapter or
•
duplex mode has not been configured
manually. We recommend to set the adapter to
auto-negotiation when installing the network
driver.
Did you establish your network connection
•
before starting your browser?
Verify your username and password entry in
•
the network connection tab.
2YHUYLHZ
,VVXH 0D\