HP Mini User Manual page 14

Component
(1)
(2)
(3)
(4)
(5)
(6)
4 Chapter 1 Features
Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/
Power light
Power switch
Drive light
Battery light
Wireless light
Wireless switch
Description
On: The computer is on.
Blinking: The computer is in Standby.
Off: The computer is off.
When the computer is off, slide the switch to turn
on the computer.
When the computer is on, briefly slide the switch
to initiate Standby.
When the computer is in Standby, briefly slide
the switch to exit Standby.
When the computer is in Hibernation, briefly
slide the switch to exit Hibernation.
If the computer has stopped responding and
Windows shutdown procedures are ineffective, slide
and hold the power switch for at least 5 seconds to
turn off the computer.
To learn more about your power settings, select
Start > Control Panel > Performance and
Maintenance > Power Options.
Blinking: The hard drive or flash drive is being
accessed.
On: A battery is charging.
Blinking: A battery that is the only available
power source has reached a low battery level.
When the battery reaches a critical battery level,
the battery light begins blinking rapidly.
Off: If the computer is plugged into an external
power source, the light turns off when all
batteries in the computer are fully charged. If the
computer is not plugged into an external power
source, the light stays off until the battery
reaches a low battery level.
Blue: An integrated wireless device, such as a
wireless local area network (WLAN) device, is
on.
Amber: All wireless devices are off.
Turns the wireless feature on or off, but does not
establish a wireless connection.
NOTE: A wireless network must be set up in order
to establish a wireless connection.