Using The Usb Smartdrive (Select Models Only); Inserting The Hp Usb Disk-On-Key; Stopping And Removing The Hp Usb Disk-On-Key - HP Mini User Manual

Using the USB SmartDrive (select models only)

NOTE:

Inserting the HP USB Disk-On-Key

Insert the HP USB Disk-On-Key into the USB SmartDrive, and then push in until firmly seated.
You will hear a sound when the device has been detected.
NOTE:
know that the device is recognized by the computer.

Stopping and removing the HP USB Disk-On-Key

CAUTION:
removing it.
To stop and remove the HP USB Disk-On-Key:
1. Double-click the Safely Remove Hardware icon in the notification area, at the far right of the
taskbar.
NOTE:
<<) in the notification area.
2. Click the name of the device in the list.
3. Click Stop, and then click OK.
4. Remove the HP USB Disk-On-Key from the USB SmartDrive.
48 Chapter 7 USB devices
Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/
The USB SmartDrive can only be used with the HP USB Disk-On-Key (purchased separately).
When you connect a USB device, you may see a message in the notification area to let you
To prevent loss of information or an unresponsive system, stop a USB device before
To display the Safely Remove Hardware icon, click the Show Hidden Icons icon (< or