Customizing Power Schemes; Setting Password Protection Upon Exiting Standby; Using External Ac Power - HP Mini User Manual

Customizing power schemes

1.
2.
3.
4.

Setting password protection upon exiting Standby

To set the computer to prompt for a password when the computer exits Standby, follow these steps:
1.
2.
3.
4.

Using external AC power

External AC power is supplied through one of the following devices:
WARNING!
a replacement AC adapter provided by HP, or a compatible AC adapter purchased from HP.
Connect the computer to external AC power under any of the following conditions:
WARNING!
When you connect the computer to external AC power, the following events occur:
Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/
– or –
a. Select Start > Control Panel > Performance and Maintenance > Power Options.
b. Select a power scheme from the Power schemes list.
c. Click OK.
Select Start > Control Panel > Performance and Maintenance > Power Options.
Select a power scheme from the Power schemes list.
Modify the Plugged in and Running on batteries settings as needed.
Click OK.
Right-click the Power Meter icon in the notification area, and then click Adjust Power
Properties.
Click the Advanced tab.
Select the Prompt for password when computer resumes from standby check box.
Click Apply.
To reduce potential safety issues, use only the AC adapter provided with the computer,
Approved AC adapter
Optional docking device or optional expansion product
Do not charge the computer battery while you are onboard aircraft.
When you are charging or calibrating a battery
When you are installing or modifying system software
When you are writing information to a CD or DVD
The battery begins to charge.
If the computer is turned on, the battery meter icon in the notification area changes appearance.
Using external AC power 13