US Robotics MAXg User Manual page 32

Wireless MAXg Router User Guide
Internet page and use it to configure the router's Internet
connection. (If you have a DSL modem, you may be required to
enter the login information your ISP provided.)
If the Wireless MAXg Router still cannot obtain a WAN IP address, it
is likely there is a problem with the cable/DSL modem or your ISP.
S t e p 4 : C a n y o u r c a b l e / D S L m o d e m c o n n e c t t o
y o u r I S P ?
If your computer has a connection to your Wireless MAXg Router
and the router ' s Internet connection is configured correctly, but
the router cannot connect to the Internet, it 's possible that the
cable/DSL modem has lost its connection or isn 't functioning
properly, or there's a problem with your ISP.
1. Ensure that an Ethernet cable is connected between your
router's WAN port and the cable/DSL modem's Ethernet port
and that the corresponding LEDs are lighted.
2. Ensure that your cable/DSL modem is connected to your wall
jack. (A cable modem uses a coax cable, and a DSL modem
uses an RJ-11 cable.)
3. Restart the cable/DSL modem. (There may be a power switch or
reset button on the modem or you may have to unplug/re-plug
the modem's power adapter. Consult your modem's
documentation.)
4. After the cable/DSL modem has restarted and connected to your
ISP, click the Renew button on your router's Status page.
file://D:\Data\USR\Certificate%20document\G-Force%20PC-PCI%20User%20Guide%2012...
第 7 頁，共 8 頁
2004/12/20