Phonak iCube User Manual page 9

GA_iCube_GB._AK1_9.10.07.qxp 24.1.2008
Getting started
3. Pairing iCube with your computer
Select "Use iCube via Bluetooth" and the pairing wizard
will guide you through the process of pairing iCube
with your computer. Pairing is necessary to control
which Bluetooth devices are permitted to communicate
with each other. It needs to be completed only once,
before first use.
16
14:27 Uhr Seite 16
To initiate the pairing process on iCube, set the
device into pairing mode by pressing and holding the
Bluetooth pairing button for 2 seconds until the
Bluetooth indicator is blue and flashing fast. iCube is
now in pairing mode for two minutes or until
pairing is completed.
17