QED MicroPurge basics MP10UH Instruction Manual page 26

Warranty
THE FOREGOING WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESSED,
IMPLIED OR STATUTORY (INCLUDING BUT NOT LIMITED TO THE WARRANTIES
OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE), WHICH OTHER
WARRANTIES ARE EXPRESSLY EXCLUDED HEREBY, and of any other obligations or liabilities
on the part of Q.E.D.,neither assumes nor authorizes any person to assume for it any other obligation
or liability in connection with said products, materials and/or workmanship.
It is understood and agreed that Q.E.D. shall in no event be liable for incidental or consequential
damages resulting from its breach of any of the terms of this agreement, nor for special damages, nor
for improper selection of any product described or referred to for a particular application.
This warranty will be void in the event of unauthorized disassembly of component assemblies. Defects
in any equipment that result from abuse, operation in any manner outside the recommended procedures,
use and applications other than for intended use, or exposure to chemical or physical environment
beyond the designated limits of materials and construction will also void this warranty. Q.E.D. shall be
released from all obligations under all warranties if any product covered hereby is repaired or modified
by persons other than Q.E.D.'s service personnel unless such repair by others is made with the written
consent of Q.E.D.
If any product covered hereby is actually defective within the terms of this warranty, Purchaser must
contact Q.E.D. for determination of warranty coverage. If the return of a component is determined to be
necessary, Q.E.D. will authorize the return of the component, at owner's expense. If the product proves
not to be defective within the terms of this warranty, then all costs and expenses in connection with the
processing of the Purchaser's claim and all costs for repair, parts and labor as authorized by owner
hereunder shall be borne by the purchaser.
RESPONSIBILITY OF THE PURCHASER
The original Purchaser's sole responsibility in the instance of a warranty claim shall be to notify Q.E.D. of
the defect, malfunction, or other manner in which the terms of this warranty are believed to be violated.
You may secure performance of obligations hereunder by contacting the Customer Service Department of
Q.E.D. and:
1. Identifying the product involved (by model or serial number or other sufficient description that
will allow Q.E.D. to determine which product is defective).
2. Specifying where, when, and from whom the product was purchased.
3. Describing the nature of the defect or malfunction covered by this warranty.
4. Sending the malfunctioning component, after authorization by Q.E.D. to:
QED Environmental Systems
2355 Bishop Circle West
Dexter, Michigan 48130
23