Mp10Uh Battery - QED MicroPurge basics MP10UH Instruction Manual

Operation
In this mode the CPM and UP, DOWN keys function differently. The CPM key becomes a key used
to scroll between the one's and the ten's digits of the ID.The UP and DOWN keys are used to
change the ID number (the MP10UH has IDs that range from 1-165) up or down in value. Sampling
in ID mode is the same as explained, above, for MP mode.
Appendix 1 lists all possible ID settings and the default refill and discharge time settings for each
CPM.Appendix 1 also shows how the refill and discharge time will change within a CPM setting as
you press the UP or DOWN keys. As you change IDs you will see the CPM change and the refill
and discharge time setting change.
Note: changes in time settings that are entered while the controller is cycling are reflected on the
next cycle change (so a long refill time of 15 seconds will time out before a new refill time
becomes valid).

MP10UH Battery

The MP10UH features sophisticated power-supply circuitry that optimizes battery life. A fresh
set of AA batteries will provide more than 100 hours of controller operation at normal operating
temperatures. As ambient temperatures drop below 15-20˚ F (-9˚ C to -6˚ C), the ability of the
alkaline batteries to deliver energy is affected. Continuous operation may be difficult in extremely
cold conditions. Once the batteries and MP10UH warm, additional cycle capacity will be regained
from a set of batteries.
Replace alkaline batteries by removing the 4 thumbscrews located on the battery cover and
inserting 3 fresh cells. The MP10UH battery holder includes space for 3 spare AA cells so you
should never be without power in the field. Properly dispose of the spent alkaline cells.
Note: If you are storing the MP10UH for more than 3 months, remove the AA batteries to prevent
leakage. The MP10UH power supply is automatically shut off by closing the lid. Make sure the lid
is closed during storage.
19