Care And Cleaning; Painted Or Enameled Surfaces; Rack; Stainless Steel - Monogram ZJ7000 Owner's Manual

Painted or
Enameled
Surfaces

Rack

Stainless
Steel
Control
Knob
49-80384-6
Be sure the controls are in the OFF position and all surfaces are cool before cleaning any
part of the warming drawer.
Use soap and warm water to thoroughly clean.
Clean the rack with detergent and water. After
cleaning, rinse the rack with clean water and
dry with a clean cloth.
Do not use a steel wool pad; it will scratch
the surface.
To clean the stainless steel surface, use warm
sudsy water or a stainless steel cleaner or
polish. Always wipe the surface in the direction
of the grain. Follow cleaner instructions for
cleaning the stainless steel surface.
The control knob may be removed for easier
cleaning.
Before removing the knob for cleaning, please
note that it is in the PROOF position.
Wash the knob in soap and water or a vinegar
and hot water solution but do not soak.
Dry and replace the knob.

Care and Cleaning

Electric Warming Drawer
To inquire about purchasing stainless steel
appliances cleaner or polish, or to find the
location of a dealer nearest you, please call
our toll-free number:
National Parts Center
888.880.3030 (Canada)
Monogram.com (U.S.)
Monogram.ca (Canada)
800.444.1845 (U.S.)
11