Table of Contents
Advertisement
• SYSTEM SETUP
• LANGUAGE SETUP
• AUDIO SETUP
• VIDEO SETUP
• SPEAKER SETUP
• DIGITAL SETUP
2. Press ▲ or ▼ to select different settings in a menu. Press ► or ENTER to active the setting.
3. Press ▲ or ▼ to select a new setting, then press ENTER to confirm the new setting.
4. Repeat steps 1 to 3 to change any settings.
5. Press the SETUP button to exit setup.
For more details, please refer to the next chapters.
1. SYSTEM SETUP
1.1 "TV SYSTEM"
This player supports two different TV systems, including NTSC or PAL. The setting of the unit can be
changed to match your TV.
"NTSC": Select this system if your television supports the NTSC color system used in North America.
"PAL": Select this system if your television supports the PAL color system used in Europe and Asia.
AUTO: Select this option to automatically switch to PAL or NTSC mode according to the disc inserted.
Note: If you use the HDMI output and the disc's color system is different to the TV system selected, the
image may flicker. Select the "AUTO" option to adjust it.
Note: You can also use the N/P button on the remote control to select the TV system in STOP mode.
1.2 "SCREEN SAVER"
Use this setting to turn the screen saver option on or off. If you turn the screen saver on, the screen
saver image appears when you leave the player in pause or stop mode more than 3 minutes. It
protects the television screen from being damaged.
On: To turn screen saver on.
Off: To turn screen saver off.
1.3 "HDMI OUTPUT"
This function allows the user to
Note:
• If your TV or monitor does not support HDCP, a blue
screen without a picture appears when playing DVD discs
which are protected by copyright.
• The HDMI output options depend on the TV system
selected (PAL or NTSC).
• See your TV instruction manual for more information on
how to select the video input source.
• Please make sure your HD TV supports the high
resolution selected.
• You can also easily change the resolution by pressing the HD/RES button on the remote control
repeatedly.
1.4 "VIDEO"
Select the video output mode. Please ensure that you have connected the corresponding video source.
In order to do this, refer to "CONNECTIONS".
Interlace-YUV: Select this option when the player is connected to a TV via a Y, Cb, Cr input.
TV-RGB: Select this option when the player is connected to a TV via a composite VIDEO or SCART
input.
P-SCAN YPBPR: Select this option when the player is connected to a TV with a progressive scan Y,
select the screen resolution for HDMI output.
GB-8
Advertisement
Table of Contents
