Troubleshooting Guide - Scott DVX 985 HD Owner's Manual

NO POWER
•Check that the player is switched on.
•Check if the power cord is properly
connected.
NO PICTURE
•Check if the TV is switched on.
•Check if the correct AV input is selected on
the TV (refer to the TV manual for more
details).
•Check the video connection between the
player and TV.
NO PICTURE AT HDMI OUTPUT.
•Check if the TV HDMI input is selected.
•Check if the HDMI resolution selected
corresponds to resolution of your HD TV.
•Check if your HD TV supports HDCP.
BAD QUALITY PICTURE
•Check the disc for fingerprints and clean with
soft cloth, wiping from the center to the
edge.
•A small amount of picture distortion may
sometimes appear-this is not a malfunction.
•Check if the disc format is compatible with the
TV (PAL/NTSC).
BLACK AND WHITE PICTURE
•Check if the disc format is compatible with the
TV (PAL/NTSC).
•Check that DVD player is not connected
through VCR.
PICTURE INTERFERENCE
•Relocate the unit further away from possible
sources of interference or emission (e.g.
radio, power amplifier, radiator etc.).

TROUBLESHOOTING GUIDE

If it appears that the unit is faulty, first consult
this checklist. It may be that something simple
has been overlooked.
Note: Under no circumstances should you try to
repair the unit yourself as this will void the
warranty. Only qualified service personnel
should remove the cover or service this unit.
THE PLAYER DOES NOT RESPOND TO THE
REMOTE CONTROL
•Aim the remote control directly at the sensor on
the front of the player.
•Avoid all obstacles which may interfere with the
transmission path.
•Inspect and/or replace the batteries.
NO SOUND FROM THE SPEAKERS
• Check the speaker cable connections.
• Check that the volume control is NOT at
minimum setting.
• Check that the mute function is not
activated.
• Check if the disc is defective by trying another
disc.
NO SOUND
•Check audio connections.
•If using a Hi-Fi amplifier, try another sound
source.
•Clean the disc.
•Check if the disc is defective by trying
another disc.
NO AUDIO AT DIGITAL OUTPUT
•Check the digital connections.
GB-19
•Check the audio setup menu to make sure that
the digital output is correctly set.