Table of Contents
Advertisement
2.2 Locating a specific time
A specific time can be selected by directly entering the time (hours, minutes, seconds).
•
Press SEARCH.
• Press ◄ or ► to highlight the time.
• Using the number keys directly enter the time when playback should start.
- The first two digits are for the hours.
- The next two digits are for the minutes.
- The last two digits are for the seconds.
• After entering the time, press ENTER to confirm. The unit will then start playback from the selected
time.
Notes:
•
Some discs may not allow use of this function.
•
Some scenes may not be located as precisely as specified.
•
This method for accessing a specific location is available only within the current title of the DVD disc
or current track of the CD.
•
For VCDs, this function only works if PBC is off.
•
Press CLEAR to delete any mistakes.
3.Programming playback
Contents of the disc can be played in a selected order.
• Press the PROGRAM button.
Note: During VCD/SVCD playback, the function is only available when PBC is OFF.
3.1 DVD Programming
• Enter the title numbers in
/
buttons to highlight the chapter number and enter
chapter numbers in two digits.
• Use ◄, ►, ▲ or ▼to move to another field.
• Repeat the above steps for the next titles/chapters.
• Press
PLAY/PAUSE or highlight PLAY on the screen and press ENTER to start the
programmed playback.
3.2 CD/VCD/SVCD Programming
• Enter the track numbers of your choice (two digits).
• Refer to the previous section to program the tracks of your choice.
3.3 Clear the Programs
• Highlight the current field on the screen and press CLEAR to delete the program.
Note:
•
Highlight "CLEAR" on
4. Repeat playback
A specific title, chapter or track can be played repeatedly.
Note: During VCD / SVCD playback, repeat playback is only available when PBC is OFF.
4.1 Repeating a Title/Chapter/Track/All disc
(2 digit format, e.g. 01). Use the
the PROG screen and press ENTER to delete all programs.
the
GB-14
PROGRAM
PROGRAM
Chapter
Title
Advertisement
Table of Contents
