Table of Contents
Advertisement
2.1 "OSD LANGUAGE"
Select the on screen display language.
2.2 "AUDIO LANG"
Select the audio language.
2.3 "SUBTITLE LANG"
Select the language for the subtitles displayed on the TV screen.
2.4 "MENU LANG"
Select the disc menu language.
2.5 "MPEG4 SUBTITLE"
Select the language for the MPEG4 subtitles.
3.AUDIO SETUP
3.1 "AUDIO OUT"
If an amplifier is connected to the unit's "COAXIAL" or
"OPTICAL" socket, the following settings can be selected.
"SPDIF/OFF": The audio signal is not transmitted via the
"COAXIAL", "OPTICAL" or "HDMI" output. Select this
option when no digital output is used.
"SPDIF/RAW": Dolby Digital signals are fed unaltered to
the digital output. Generally, this setting is used with a
digital 5.1 channel receiver.
"SPDIF/PCM": Dolby Digital and MPEG 2 multi-channel signals are converted to PCM (Pulse Code
Modulation). This setting is suitable for amplifiers or receivers without digital multi-channel sound
decoders.
Note:
• This unit cannot support DTS decode.
3.2 "GM5"
This option allows you to convert a 2 channel signal into a 5 channel sound with sound effects:
CINEMA, SONG or OFF (function disabled).
1.3 "KEY"
Use the ▲ or ▼ button to adjust the key tone.
4.VIDEO SETUP
Use the ▲ or ▼ button to adjust the BRIGHTNESS, CONTRAST, HUE, SATURATION and
SHARPNESS of the video output quality.
5.SPEAKER SETUP
5.1 "DOWNMIX"
LT/RT: This option allows you to listen to the soundtrack as it would sound in a movie theatre, if the
original movie was recorded in the Pro Logic Dolby Digital format.
STEREO: When 2-channel sound is played, select this option to obtain stereo sound.
VSS: When 5.1-channel sound is played, the surround sound effect will be heard from the main
soundtrack.
5.1 CH: The 5.1-channel sound is output.
5.2 "SUBWOOFER"
OFF: The subwoofer output is disabled.
ON: The subwoofer output is enabled.
GB-10
Advertisement
Table of Contents
