5. Recommended Spare Parts
5.1 Sensor and head amplifier
Sensors and head amplifiers are supplied as integral items, and therefore no spare parts are available.
In the case of sensor mounted head amplifiers, the sensor is attached to the head amplifier, and the
two are not usually available separately.
5.2 Control Units
i) Fuses
Standard Control Unit:
MEP*L/1* (220/240V)
MEP*L/2* (110/120V)
Rack Mounted Unit:
MEP*R/** All voltages
All fuses are 5mm×20mm
ii) Edge Connectors (Rack units only)
I.S. units:
MEP3R
Screws for mounting connectors
Washer
K179 T 63mA, 35A Breaking capacity (IEC 127)
K1796 T 125mA, 35A Breaking capacity (IEC 127)
H1525 F 500mA, 1500A Breaking capacity (IEC127)
K1806
4 way edge connector
K1805
12 way edge connector
9722-827 M3 × 8mm cheese head (2 required per
connector)
9726-807 M3 (2 required per connector)
19