Marantz SM-11S1 User Manual page 18

I [
CONNECTIONS ]
• Connection Example 4: Stereo Complete Bi-amp Connection
1.
Connect 2 Marantz SC-11 S1 by EC.B.S. for synchronized control.
For EC.B.S. connection, connect with commercially available cables with monaural
¢?
monaural miniplugs or stereo
¢?
stereo
miniplugs as described in F.e.B.S. (pg. 26) in the SC-11 S1 instruction manual.
2. Refer to the SC-11 S1 instruction manual (pg. 27) and set the SC-11 S1 ID numbers.
3.
Connect the analog output of the CD player etc. to the L ch input jacks of both pre-amps. As both pre-amps operate as monaural
pre-amps in BI-AMP mode, do not use the R channel of the input jacks for the SC-11 S1 .
• About Complete Bi-Amp
Proposed by Marantz, the complete bi-amp connection is an advanced technique that enhances sound quality. The low and mid/high
amplifiers are separate and independent of the preamplifier, therefore interference between low and mid/high sounds is reduced
to a minimum. As a result, a wide sound environment can be reproduced.
Note:
Speaker systems that can be connected using complete bi-amp must support bi-amp connections. Before connecting your
speaker system, check the speaker system instruction manual, or contact the speaker manufacturer to check whether the
speakers support bi-amp connections.
Miniplug connecting cord x
2 (commercially available) F.C.B.S.--+
I
L ch for SC-11S1
• Set to 10 1
®
o
®
®
Remove shorting Speaker L ch
bar
®
®
®
Remove shorting
bar
®
®
To power outlet
"""":'~----~-
Set to BI-AMP
F.C.B.S.
+--
-~-To
power outlet
®
o
®
®
I
Set the BALANCED button and SPEAKER 1 button on the front panel of the SM-11S1s for both the left channel and right channel to ON
I
1.2
I [
CONNECTIONS ]
• Connection Example 4: Stereo Complete Bi-amp Connection
1.
Connect 2 Marantz SC-11 S1 by EC.B.S. for synchronized control.
For EC.B.S. connection, connect with commercially available cables with monaural
¢?
monaural miniplugs or stereo
¢?
stereo
miniplugs as described in F.e.B.S. (pg. 26) in the SC-11 S1 instruction manual.
2. Refer to the SC-11 S1 instruction manual (pg. 27) and set the SC-11 S1 ID numbers.
3.
Connect the analog output of the CD player etc. to the L ch input jacks of both pre-amps. As both pre-amps operate as monaural
pre-amps in BI-AMP mode, do not use the R channel of the input jacks for the SC-11 S1 .
• About Complete Bi-Amp
Proposed by Marantz, the complete bi-amp connection is an advanced technique that enhances sound quality. The low and mid/high
amplifiers are separate and independent of the preamplifier, therefore interference between low and mid/high sounds is reduced
to a minimum. As a result, a wide sound environment can be reproduced.
Note:
Speaker systems that can be connected using complete bi-amp must support bi-amp connections. Before connecting your
speaker system, check the speaker system instruction manual, or contact the speaker manufacturer to check whether the
speakers support bi-amp connections.
Miniplug connecting cord x
2 (commercially available) F.C.B.S.--+
I
L ch for SC-11S1
• Set to 10 1
®
o
®
®
Remove shorting Speaker L ch
bar
®
®
®
Remove shorting
bar
®
®
To power outlet
"""":'~----~-
Set to BI-AMP
F.C.B.S.
+--
-~-To
power outlet
®
o
®
®
I
Set the BALANCED button and SPEAKER 1 button on the front panel of the SM-11S1s for both the left channel and right channel to ON
I
1.2