Marantz SM-11S1 User Manual page 12

I [
NAMES AND FUNCTIONS OF PARTS
(REAR PANEL
]
@
tJ
lIl'mIlD' lIiI·rmm·B'!l.!!!~
@
TRIGGER IN
r::
ON
@
@
mO
FF
@
@ @
@
@
SYSTEM 1 OR SYSTEM 2 ; 4 - 8 OHMS BTL; 8 OHMS
SYSTEM 1 AND SYSTEM 2 : 8·16 OHMS BTL: 16 OHMS
r=STEREO
Iron
!YO
@
@
\~~,7
B
A
@
tJ
@
~F=:::::;;;::::::::::::::==~======:::::::;@;;::=================:I~~~
=' =
@ @
rnaranlZ
MODEL NO. SM·1151
@
UNBALANCED INPUT Jack
These jacks are for connecting to the unbalanced output
jacks of a control amplifier. In BTL mode, the Lch input
terminal is used.
@
BALANCED INPUT Jacks
These jacks are for connecting to the balanced output
jacks of a control amplifier. In BTL mode, the Lch input
terminal is used.
©
SPEAKER SYSTEMS Output Terminals
These jacks are for connecting to a speaker system.
You can connect 2 speaker systems to the SM-11 S1,
SPEAKER SYSTEM 1 and 2. Speaker output can be
turned ON/OFF from the SPEAKERS 1 / 2 buttons on
the front panel.
When using BLT mode, connect the speaker + side to the
Lch + jack, and the speaker - side to the Rch + jack.
©
REMOTE POWER CONTROL Jacks
(TRIGGER IN)
This jack controls this unit's power ON/OFF in sync with
the Marantz SC-11 S1 control amplifier ON/OFF control.
Connect to the SC-11 S1 TRIGGER OUT jack using a
commercially available cable.
For more information on REMOTE POWER CONTROL,
see pg. 20.
~
REMOTE POWER CONTROL ON/OFF
Switch
ON: Set to control this unit's power ON/OFF in sync with
the Marantz SC-11 S1 control amplifier ON/OFF
control.
OFF: Set to use the POWER ON/OFF switch on the
front panel of the unit to switch the unit's power
ON/OFF.
®
AC IN Power Cable Connection Socket
Connect this socket to the power outlet using the included
power cable.
@
AMP MODE Switch
STEREO: Set to use the SC-11 S1 as an ordinary stereo
power amplifier.
BTL: Set to connect a stereo amp by BTL and use
this unit as a monaural power amp.
For more information on AMP MODE, see pg. 19.
Caution:
Always make sure that the power is OFF before
switching this switch.
6
I [
NAMES AND FUNCTIONS OF PARTS
(REAR PANEL
]
@
tJ
lIl'mIlD' lIiI·rmm·B'!l.!!!~
@
TRIGGER IN
r::
ON
@
@
mO
FF
@
@ @
@
@
SYSTEM 1 OR SYSTEM 2 ; 4 - 8 OHMS BTL; 8 OHMS
SYSTEM 1 AND SYSTEM 2 : 8·16 OHMS BTL: 16 OHMS
r=STEREO
Iron
!YO
@
@
\~~,7
B
A
@
tJ
@
~F=:::::;;;::::::::::::::==~======:::::::;@;;::=================:I~~~
=' =
@ @
rnaranlZ
MODEL NO. SM·1151
@
UNBALANCED INPUT Jack
These jacks are for connecting to the unbalanced output
jacks of a control amplifier. In BTL mode, the Lch input
terminal is used.
@
BALANCED INPUT Jacks
These jacks are for connecting to the balanced output
jacks of a control amplifier. In BTL mode, the Lch input
terminal is used.
©
SPEAKER SYSTEMS Output Terminals
These jacks are for connecting to a speaker system.
You can connect 2 speaker systems to the SM-11 S1,
SPEAKER SYSTEM 1 and 2. Speaker output can be
turned ON/OFF from the SPEAKERS 1 / 2 buttons on
the front panel.
When using BLT mode, connect the speaker + side to the
Lch + jack, and the speaker - side to the Rch + jack.
©
REMOTE POWER CONTROL Jacks
(TRIGGER IN)
This jack controls this unit's power ON/OFF in sync with
the Marantz SC-11 S1 control amplifier ON/OFF control.
Connect to the SC-11 S1 TRIGGER OUT jack using a
commercially available cable.
For more information on REMOTE POWER CONTROL,
see pg. 20.
~
REMOTE POWER CONTROL ON/OFF
Switch
ON: Set to control this unit's power ON/OFF in sync with
the Marantz SC-11 S1 control amplifier ON/OFF
control.
OFF: Set to use the POWER ON/OFF switch on the
front panel of the unit to switch the unit's power
ON/OFF.
®
AC IN Power Cable Connection Socket
Connect this socket to the power outlet using the included
power cable.
@
AMP MODE Switch
STEREO: Set to use the SC-11 S1 as an ordinary stereo
power amplifier.
BTL: Set to connect a stereo amp by BTL and use
this unit as a monaural power amp.
For more information on AMP MODE, see pg. 19.
Caution:
Always make sure that the power is OFF before
switching this switch.
6