Section 1 - Assembly Instructions - Snapper 6-3131 Installation & Operator's Manual

SECTION 1 – ASSEMBLY INSTRUCTIONS
FIGURE 1.16
B. Place deck in lowest cutting height setting.
C. Slide upper end of Grass Tube (end without
Handle) into opening in Front Cover Assembly.
D. Slide lower end of Grass Tube over adapter and
rotate towards mower to secure Handle Base under
Latch. See Figure1.17.
E. Adjust deck to desired cutting height.
GRASS
TUBE
HANDLE BASE
TUBE
HANDLE
ROTATE GRASS
TUBE TOWARDS
MOWER
FIGURE 1.17
9