Description; Preparation; Use; Filling The Water Tank - TEFAL Pro Express Care Manual

Table of Contents

Advertisement

PLEASE REFER TO SAFETY INSTRUCTIONS AT THE BEGINNING
OF THIS BOOKLET BEFORE USING YOUR APPLIANCE

Description

1.
Steam control button
2.
Power cord storage button*
3.
Double protection cover*
4.
Carry handle*
5.
Retaining hoop for locking iron on the base unit*
6.
Handle for removing and replacing the detachable water tank
7.
Boiler (in the base unit)
8.
Steam cord storage compartment
9.
Anti-calc collector
«PROTECT CONCEPT» safety system *
Your generator is fitted with the «Protect Concept» system:
• Double protection cover.
• Cover automatically locks when it is folded up over the iron and open using the unlocking button .
• Carry handle .
Locking system *
Your steam generator is fitted with a retaining hoop to hold the iron onto the base with a locked position for
easy transport and storage:
• Locking. • Unlocking.
To transport your steam generator using the handle of the iron:
- Put the iron on the steam generator iron rest and raise the retaining hoop over the iron until it locks into place (audible click).
- Hold the iron by the handle to transport your steam generator.

Preparation

What water may be used?
• Tap water:
Your appliance has been designed to function using untreated tap water. If your water is very hard, we recommend you
use a mix of 50% untreated tap water and 50% distilled water available in hardware stores.
• Types of water not to use:
Heat concentrates the elements contained in water during evaporation. The types of water listed below may contain organic
waste, mineral or chemical elements that can cause spitting, brown staining or premature wear of the appliance: water from
clothes dryers, scented or softened water, water from refrigerators, batteries, air conditioners, rain water, boiled, filtered or bottled
water. These types of water should not be used in your TEFAL iron. Also only use distilled water as advised above.
Always remember:
Never use rainwater or water containing additives (like starch, fragrance or water from domestic appliances). Such
additives can affect the steam properties and at high temperature, form deposits in the steam generator chamber
which are likely to stain your washing

Filling the water tank

• Pull the cover up over the iron until the protection system automatically locks (you will hear a «click» )
• Remove the detachable water tank using the handle (located at the front of the steam generator)
• Fill the water tank without exceeding the Max level
• Push it back into its housing until you hear a «click»
• Press the unlocking button on the protective cover until you hear a click, and then fold it back on to the generator base unit

Use

Pro Express
Switch the steam generator on
The first time the appliance is used, there may be some fumes and smell but this is not harmful. They will not
affect use and will disappear rapidly.
• Put the steam generator on a flat, stable, horizontal surface that is heatproof and waterproof.
• Always ensure that the base unit is positioned close enough to the ironing surface to avoid straining and wear of
the steam cord.
• Completely unwind the power cord and take the steam cord out of its storage space.
Care
10.
Control panel
a. «ON-OFF» button with light
b. «Water tank empty» light and «OK» button
c. «Anti-Calc» light and «OK» button
d. «ECO» button
e. Temperature adjustment buttons
11.
Solplate
*
*
*
Depending on model

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pro express x-pert care

Table of Contents