TEFAL PRO EXPRESS STEAM GENERATOR Quick Start Manual

Quick start guide
Please follow the instructions for use carefully. However, for ease of use we have also prepared this Quick start guide.
2
Preparation
1
Place your steam
generator on a stable,
heat resistant surface.
Filling with water
Fill the water tank
with tap water.
3
Check that the water
tank is pushed down
firmly in place.
Plug in
4
Completely unwind the
power cord and plug in.
Switch on
5
Switch on by pressing
the on/off switch.
The green light on the
control panel flashes.
Thermostat
6
Position the iron's thermostat control
to the type of fabric to be ironed and
adjust the steam control dial e.g. lower
output for delicate fabrics.
RESTART
Ready to use
7
The iron is ready to use
when the thermostat light
goes out and the green light
on the control panel stops
flashing, after approximately
2 minutes.