4. INSTALLATION & CONFIGURATION IN macOS
1) The Adapter should automatically be recognized when
connected to a Thunderbolt 3 port
2) Check in: About this Mac > System Report >
Thunderbolt Device Tree > Thunderbolt Bus >
Thunderbolt 3 to 10G Ethernet Dongle
3) Configure the Adapter from the Network menu
4) Click on Advanced to set the connect speed.
Notes:
Compatible with macOS 10.13.4 and up
•
Connecting at the end of a daisy chain may reduce the
•
performance of the adapter
Consult the documentation of your attached router or
•
switch for configuration information
The connected router or switch must support the
•
selected speed
Thunderbolt™ 3 to 10 Gigabit Ethernet Adapter
www.cablematters.com
5