Trouble Shootings - Coway AP-1018F Manual

TROUBLE SHOOTING
The product may not operate correctly due to trivial reasons or inexperienced usage,
although these are not product malfunctions. In such cases, the problem can be solved
easily without the help of a service center if the following items are checked. If the problem
is not resolved even after checking the following, please contact a service center.
Problem
There is no breeze.
Air speed
doesn't change.
Air speed is very
low.
Pollution level
doesn't change.
There's a smell
from the vent.
The air quality
indicator flashes.
If other functional
flaws occur
Chec
k
• Is the power plugged in?
• Is the entire display off?
• Is there a power failure?
• Is the automatic indicator off?
• Is the silent indicator off?
• Is it past time for filter cleaning
and replacement?
• Is there dust on the air quality
sensor
lens ?
• Does the pollution level
continuously
appear high?
• Does the pollution level
continuously
appear low?
• Is it past time for filter cleaning
and replacement?
• Request service.
• Check the problem, then unplug the power and request service.
Possible Solutions
Plug the power cord into a 220 V - 50
Hz
socket.
Press the power button, then select
your
desired feature.
After the power comes back on, use
the
purifier.
You can only select air speed in
manual
mode (normal).
You can only select air speed in
manual
mode (normal).
Check your filter cleaning and
replacement cycle and clean or
replace filters.
Clean the air quality sensor lens (p.
).
15
Set your pollution sensitivity to
insensitive or standard (p. 14).
Set your pollution sensitivity to
sensitive
or standard (p. 14).
Check your filter cleaning and
replacement cycle and clean or
replace
filters.