Advertisement
VENTO 3600 (continued)
D
Installing a hard disk drive (HDD)
1
E
Installing an expansion card
1
3
English
D
1. Press down the HDD cage lock, then pull the cage out
of the chassis.
2. Insert the HDD into the upper bay of the cage. Secure
with screws.
3. Reinstall the HDD cage to the chassis.
4. Connect cables.
E
1. Push out the green lock tab.
2. Remove the metal cover opposite the slot you want to
use.
3. Install the card.
4. Secure the card with the lock tab you removed earlier.
F
1. Remove the drive bay cover and the knock-down metal
cover, then slide the bay lock toward the
2. Insert the FDD into the bay.
3. Align the FDD holes with the bay holes, then slide the
bay lock toward the sign to secure the drive.
4. Connect cables.
G
1. Match the side cover hooks to the chassis rail edge,
then fit the side cover to the chassis.
2. Slide the cover toward the front.
3. Replace the cable management kit.
Spanish
2
4
3
2
4
sign.
F
Installing a floppy disk drive (FDD)
1
Screw holes
G
Reinstalling the side cover
1
2
German
Traditional Chinese
2
Side panel hooks
Chassis side rail
3
French
Simplified Chinese
P/N:
3
Advertisement
