Table of Contents
Advertisement
Menu functions
SMS
(Menu 5.0.2)
You can configure default SMS settings.
•
Send settings: set up the following options for
sending a text message:
Reply path: allow the recipient to reply to you
through your message centre.
Delivery report: set the network to inform you
when your message has been delivered.
Character support: select a character encoding
type. If you select Automatic, the phone switches
the encoding type from GSM-alphabet to Uni-
code if you enter an Uni-code character. Use of
Uni-code encoding will reduce the maximum
number of characters in a message to about half.
If this menu is not shown, your phone provides the
Automatic character encoding by default.
Bearer selection: select either GSM or GPRS
preferred, depending on your network.
•
Common profile: select a profile.
•
Profile settings: set the following properties in a
profile:
52
Service centre: store or change the number of
your message centre.
Default destination: enter the default
destination. It will be displayed in the first field on
the Recipients field.
Default type: set the default message type. The
network can convert the messages into the
selected format.
Default validity: set the length of time your
messages are stored in the SMS centre while
attempts are made to deliver them.
Setting name: enter a profile name.
Email
(Menu 5.0.3)
You can configure default e-mil settings.
You cannot change e-mail profile settings while an
e-mail is being sent or retrieved.
•
Send settings: set up the following options for
sending an e-mail:
Delivery receipt: set the network to inform you
when your e-mail has been delivered.
Advertisement
Table of Contents
