Table of Contents
Advertisement
•
Press the left soft key to access the camera
options. See the next section.
•
Use the keypad to change the camera settings
or switch to other modes.
3. Press [Centre] to take a photo. The photo is saved
in the Pictures folder.
4. To
use photo options
delete the photo
return to Capture mode
Using camera options in Capture mode
In Capture mode, press the left soft key to access the
following options:
•
Shooting mode: take a photo in the following
modes:
Single shot: take a photo in normal mode.
Multi shot: take a series of action stills. You can
select the number of still images the camera will
take.
p. 38
Press
<Options>.
p. 38
[C] and then <Yes>.
<Preview>.
Mosaic shot: take several stills and save them in
one frame. You can select the layout.
•
Effects: change the colour tone or apply a special
effect to photos to be taken in normal mode.
•
Frames: apply a decorative frame.
•
Flash: set the flash setting.
•
Timer: set a time delay before the camera takes a
photo.
•
Brightness: display the brightness control bar.
•
Record video: switch to Record mode.
•
Zoom: display the zoom control bar.
•
Go to Photos: go to the Pictures folder.
•
Settings: change the default settings for taking a
photo.
Size: select an image size.
Quality: select an image quality setting.
View finder: select a preview mode, either Full
screen mode or Standard ratio mode.
Shutter sound: select the sound that you hear
when you press the shutter release, [ ] or
[Centre].
37
Advertisement
Table of Contents
