* Some of the contents in this manual may differ from your phone, depending on the software installed or your service provider. World Wide Web http://www.samsungmobile.com Printed in Korea Code No.: GH68-05275A English. 08/2004. Rev. 1.0...
GPRS TELEPHONE SGH-E800...
Contents Important safety precautions ... 7 Special features ... 9 Unpacking ... 13 Your phone ... 14 Phone layout... 14 Display... 17 Backlight ... 20 Service display... 20 Camera ... 20 Built-in antenna ... 21 Getting started... 22 Inserting/Removing the SIM card ... 22 Installing/Removing/Charging the battery...
Contents Using the menus ... 71 Accessing a menu function... 71 List of menu functions ... 72 Phonebook menu ... 78 Find name ... 78 Add entry ... 81 Speed list ... 82 Copy all to phone ... 84 Send all via infrared... 85 Delete all...
Contents Minute minder... 107 Quiet mode... 107 Slider tone... 108 Alerts on call... 108 Messages ... 109 Short messages ... 109 Multimedia messages ... 116 Push messages ... 127 Preset messages ... 128 Voice mail ... 128 Broadcast ... 129 Settings ...
Contents Display... 174 Greeting message... 176 Language ... 176 Security ... 177 Auto redial... 180 Voiceclarity ... 180 Slide down operation ... 181 Active slide ... 181 Anykey answer... 181 Fax mode ... 182 Infrared activation ... 182 Reset settings ... 183 Using ALS (Alternate Line Service) ...
Important safety precautions Read these guidelines before using your wireless phone. Failure to comply with them may be dangerous or illegal. Road safety at all times Do not use a hand-held phone while driving; park the vehicle first. Switching off when refuelling Do not use the phone at a refuelling point (service station) or near fuels or chemicals.
Keeping small children away from your phone Keep the phone and all its parts including accessories out of the reach of small children. Accessories and batteries Use only Samsung-approved accessories and batteries. Qualified service Only qualified service personnel may install or repair your phone.
Special features Compact & Stylish slide-up design VGA camera with flash (see page 165) With the built-in VGA Camera, the Samsung E800 allows you to shoot the clearest of images, anytime, anywhere. Take a close look at another advanced technology masterpiece created by Samsung.
Special features Background noise sensitivity You can talk in the midst of a crowd and the phone will automatically increase the volume and clarity of the incoming call to make it more audible. Even better than simply raising the volume on your phone, the E800 automatically senses the volume around you to enhance your conversation and keep you from having to run out of the room.
Step up to the latest and greatest in convenience with the E800. 65,536 color TFT LCD As usual, Samsung leads the way in mobile display quality. The display of the E800 will astounded you with its vivid colors and distinctive class.
JAVA (see page 146) Make your free time more relaxing with a bit of mobile entertainment. The Samsung E800s Java based games bring the challenges to you. Enjoy the embedded games and download new Java ‚...
Your package contains the following items: Phone Battery In addition, you can obtain the following accessories for your phone from your local Samsung dealer: • Advanced handsfree car kit • Simple handsfree car kit • PC data link kit • Headset...
Your phone Phone layout The following illustrations show the main elements of your phone: Mirror Navigation keys (Up/Down/Left/ Right) Soft key (left) Volume keys WAP Browser Dial/Menu confirmation key Cancel/Back/ Correction key Special function keys (Reverse side) Camera Flash Earpiece Display Power On/Off / Menu exit key...
Your phone Key(s) Description Perform the functions indicated by the text above them, on the bottom line of the display. (soft keys) In Menu Mode, scroll through the menu options. In Idle Mode, the Left key enters the New SMS message writing screen, the Right key enters the Incoming call’s melody setting menu and the Down key enters the Calendar menu.
Your phone Key(s) Description (continued) Ends a call. When pressed and held, switches the phone on or off. In Menu Mode, cancells your input and returns to Idle Mode. When pressed and held in Idle Mode, quickly accesses your voice mail server.
Key(s) Description (continued) (on the right side of the phone) When pressed and held, turns the camera capture mode on. In capture mode, works as a camera shutter. Display Display layout The display has three areas: Menu Phonebook Area First line Middle lines Last line Icons...
Your phone Icons Icon Description Shows the received signal strength. The more the number of bars, the stronger the signal. Appears when a call is in progress. Appears when you are out of a service area. When it displays, you cannot make or receive calls.
Your phone Icon Description (continued) Appears when you are connected to the GPRS network. Appears when your SIM card supports the Call diverting status indication and the Call diverting feature is activated. When your SIM card supports ALS (Alternate Line Service), this icon may appears with the number 1, 2, or both.
Your phone Backlight The display and the keypad are illuminated by a backlight. When you press any key, the backlight illuminates. It turns off if you don’t press any key within a given period of time, depending on the Backlight menu option. For further details, see page 175.
Your phone Built-in antenna Your phone has a built-in antenna. As with other mobile radio transmitting equipment, do not touch the antenna unnecessarily when the phone is switched on. Contact with the antenna affects call quality and may cause the phone to operate at a higher power level than needed.
Getting started Inserting/Removing the SIM card When you subscribe to a cellular network, you are provided with a SIM card loaded with your subscription details, such as your PIN, any optional services available and so on. • Keep all miniature SIM cards out of the reach of small children.
Your phone is powered by a rechargeable Li-ion battery. Use only approved batteries and chargers. Ask your local Samsung dealer for further details. Note: You must fully charge the battery before using your phone for the first time. A discharged standard battery is fully recharged in approximately 150 minutes.
Getting started 2. Press the battery against the back of the phone until it clicks into place. Removing the battery 1. Switch off the phone by pressing and holding the key. 2. To remove the battery, pull the battery catch toward the top of the phone and hold it in that position.
Charging the battery by using the travel adapter Note: The phone can be used while the battery is being charged, but this causes the battery to charge more slowly. 1. Plug the connector of the travel adapter into the jack at the bottom of the phone. Check that the arrow on the connector is facing towards the front of the phone.
Getting started 3. When charging is finished, disconnect the adapter from the power outlet and from the phone by pressing the grey tabs on both sides of the connector and pulling the connector out. Low Battery Indicator When the battery is weak and only a few minutes of talk time remain, the battery sensor informs you in the following ways: an empty battery icon flashes ), you hear a warning tone and a message...
Switching the phone on or off To switch the phone on: 1. Hold down the switches on. 2. If the phone asks for a PIN, enter the PIN and press the Ok soft key. For further details, see page 189. The phone searches for your network and the current date and time appear on the display.
Getting started Selecting functions and options Your phone offers a set of functions that allow you to customise your phone. These functions are arranged in menus and sub-menus, accessed via the two soft keys marked and sub-menu allows you to view and alter the settings of a particular function.
To view various functions/options available or select the one is required: 1. Press the appropriate soft key. 2. To select the: • function displayed • option highlighted view the next function or highlight the next option on a list move back to the previous function or option on a list move back up one level...
Getting started Locking or unlocking the keypad You can lock the soft keys, navigation keys, WAP brower key, volume keys and camera key to avoid pressing keys by accident. To lock the keys, slide the folder down. If you set the Stop operation option in the Slide down operation menu (see page 181), the phone locks the keys automatically when you slide the folder down.
Call functions Making a call Using the number keypad When the idle screen is displayed, enter the area code and phone number, and press the Note: If you have set the Auto redial option to On, the number is redialled automatically up to ten times if the person you called does not answer or the line is busy.
Call functions Making an international call 1. Press and hold the 0 key for the international prefix. The + character appears. 2. Enter the country code, area code and phone number and press the Making a call from phonebook You can store the names and phone numbers called regularly in the SIM card and phone’s memory, which are jointly called the Phonebook.
3. To dial the number, press the To view each call record, see “Call records” on page 92.. Viewing missed calls If you have a subscription that includes the Caller Line Identification (CLI) feature and you are unable to answer a call for any reason, you can find out who was calling you so that you can call the person back.
Call functions Speed-dialling from Phonebook Once you have stored numbers in the Phonebook, you can dial a number simply by pressing one or two keys. For further details, see page 82. Ending a call When you want to finish your call, briefly press the key.
Adjusting the volume During a call, if you wish to adjust the earpiece volume, use the volume keys on the left side of the phone. When you hear a sound, such as ringtone, you can also adjust the earpiece volume. But it is not fixed. Note: When a call comes in, you can mute the call ringer by pressing and holding one of the volume keys.
Call functions Switching the microphone off (Mute) You can temporarily switch your phone’s microphone off so that the other person cannot hear you. Example: You may wish to say something to another person in the room but do not want the calling person to hear you. 1.
The Phonebook entries are listed. 4. Enter the first a few letters of the name that you want to find. The Phonebook entries are listed starting with the first entry matching your input. Note: You can also scroll through the Phonebook from the beginning, by pressing the Up or Down key.
Call functions 1. When you are connected to the teleservice system, press the Options soft key. 2. Press the Up or Down key to highlight the Send DTMF option. Press the Select soft key. 3. Enter the number you want to send and press the OK soft key.
Using the voiceclarity function 1. Press the Options soft key. 2. Press the Up or Down key to highlight the Voiceclarity on / Voiceclarity off option. Press the Select soft key. Note: You cannot activate the voiceclarity when you use the loudspeaker and the handsfree car kit. Using the SAT (SIM Application Toolkit) If you use a SAT card that provides additional services, the SAT menu displays.
Call functions To make a call while you have a call in progress: 1. Enter the phone number that you want to dial or look it up in the Phonebook. 2. Press the The first call is automatically put on hold. Or alternatively: 1.
To answer a call while you have another call in progress: 1. Press the The first call is automatically put on hold. 2. To switch between the two calls, press the Options soft key and then select the Swap option. 3.
Call functions Setting up the multi-party call 1. Call the first participant in the normal way. 2. Call the second participant in the normal way. The first call is automatically put on hold. 3. To join the first participant to the multi-party call, press the Options soft key and select the Join option.
To answer an incoming call when you have the multi-party call in progress and another call on hold: 1. Press the Accept soft key. 2. Select the End held option to end the call on hold. Or, select the End current option to end the call in progress.
Call functions 2. Press the Up or Down key to highlight a participant and press the Select soft key. The call ends with that participant, but you can continue to talk with the other participants. 3. End the multi-party call by pressing the key.
Entering text At many times while you are using your phone, you need to enter text, such as when storing a name in the Phonebook, writing a new message, creating your personal greeting or scheduling events on your calendar. You are provided with the following text input modes: •...
Entering text • Symbolic mode This mode allows you to enter special characters. Changing the Text Input Mode When you are in a field that allows characters to be entered, you will see the text input mode indicator at the bottom of the display. Example: Entering a name in the Phonebook To change to another text input mode: 1.
Quickly Changing the Text Input Mode To switch between the Number and previous mode Symbol and previous mode ABC and T9 mode (English input mode) Using the Neopad Hindi Mode When you input Hindi characters, you will see the below screen on the phone. Example: Entering a message in New message box To type a character in the Neopad Hindi mode: 1.
Entering text Note: When you enter a character, you will see the predicted word on the Word Prediction Box at the bottom of display. If you want to know about this input method, see the page 50. Otherwise, repeat above steps to enter other characters.
Virama (toggles a Virtual Keypad page) Key 1~7: Consonants Groups Key 8: Independent Vowels Group Key 9: Dependent Vowels Group Key 0: Signs & Symbols Example: To enter press the 1, Example: To enter ), press the 1, 1, 9, 2, 8, page), and 2 keys.
Entering text To type a word using the linguistic dictionary (Forward Prediction): 1. Input the first character of the word you want to enter. 2. You will see the word starting with the first character you input at step 1 in the Word Prediction Box at the bottom of display.
Using the Neopad Marathi Mode When you input Marathi characters, you will see the below screen on the phone. Example: Entering a message in New message box To type a character in the Neopad Marathi mode: 1. Press a corresponding key to access the Virtual Keypad that contains a character you want.
Entering text List of the characters available in Marathi Charachters in the Order Displayed Press the key And press...
Virama (toggles a Virtual Keypad page) Key 1~7: Consonants Groups Key 8: Independent Vowels Group Key 9: Dependent Vowels Group Key 0: Signs & Symbols Example: To enter 3, 9, 3, 0, 2, 2, 1, 9, and 3 keys. List of the combination of half and full formed consonant (Writing order: ), press the 8, 2, 4,...
Entering text To type a word using the linguistic dictionary (Forward Prediction): 1. Input the first character of the word you want to enter. 2. You will see the word starting with the first character you input at step 1 in the Word Prediction Box at the bottom of display.
Using the Neopad Tamil Mode When you input Tamil characters, you will see the below screen on the phone. Example: Entering a message in New message box To type a character in the Neopad Tamil mode: 1. Press a corresponding key to access the Virtual Keypad that contains a character you want.
Entering text List of the characters available in Tamil Charachters in the Order Displayed Press the key Virama (toggles a Virtual Keypad page) Key 1~4: Consonants Groups Key 5: Grantha characters Key 6~7: Independent Vowels Group & Ayudam Key 8~9: Dependent Vowels Group And press...
Example: To enter (Virama), 3, 4, 2, 8,and 2 keys. Example: To enter the 6, 3, 4,3, 8, 2, 2, 5, 9, 2, 3, (Virama), and 3 keys. List of the combination (Writing order: ), press the 2, 3, 4, (Writing order: Entering text ), press...
Entering text To type a word using the linguistic dictionary (Forward Prediction): 1. Input the first character of the word you want to enter. 2. You will see the word starting with the first character you input at step 1 in the Word Prediction Box at the bottom of display.
Using the Neopad Bengali Mode When you input Bengali characters, you will see the below screen on the phone. Example: Entering a message in New message box To type a character in the Neopad Bengali mode: 1. Press a corresponding key to access the Virtual Keypad that contains a character you want.
Entering text List of the characters available in Bengali Charachters in the Order Displayed Press the key Halant (Virama) for a link (toggles a And press Virtual Keypad page)
Key 1~7: Consonants Groups (Banjonborno) Key 8: Independent Vowels Group (Shorborno) Key 9: Dependent Vowels Group (Kar) Key 0: Signs, Symbols, and Halant sound Example: To enter 2, 9, 1, 0, and 1 keys. Example: To enter ), press the 5, , and 2 keys.
Entering text List of combination...
To type a word using the linguistic dictionary (Forward Prediction): 1. Input the first character of the word you want to enter. 2. You will see the word starting with the first character you input at step 1 in the Word Prediction Box at the bottom of display.
Entering text Inserting a Space To insert a space between words, press the Entering a Indian number directly To enter a Hindi, Marathi, Tamil or Bengali number, press and hold the number key in each Indian mode. Scrolling To move the cursor to the left or right within the text, press the Left or Right key.
3. If the word is correct, start entering the next word. Otherwise, press the 0 key repeatedly to display alternative word choices for the keys that you have pressed. Example: Both “of” and “me” have the sequence of 6 and 3. The phone displays the most commonly used choice first.
Entering text Example: The 1 key is used twice to display two punctuation marks. ‘ Changing the case To change the case of the next letter(s) that you type, press the key. There are three cases: • Lower Case (no indicator) •...
Using the ABC mode When typing in the ABC mode, press the key labelled with the required letter: - Once for the first letter - Twice for the second letter - And so on Example: To display the letter “C”, quickly press the 2 key three times.
Entering text List of the characters available characters in the order displayed Changing the case To change the case of the next letter(s) that you type, press the • Lower Case (no indicator) • Initial Capital ( • Capital Lock ( Inserting a space To insert a space between words, press the Entering a number directly...
To move the cursor to the left, right, up or down within the text, press the navigation keys. Clearing letters and words To clear the letter to the left of the cursor, press the C key. You can clear all of the letters on the display by pressing and holding the C key.
Entering text Using the number mode The Number mode enables you to enter numbers in your text. Press the keys corresponding to the digits you want to enter.
Using the menus The phone offers a range of functions that allow you to tailor the phone to your needs. These functions are arranged in menus and sub-menus. Accessing a menu function The menus and sub-menus can be accessed by pressing the Menu or Phonebook soft key in Idle Mode, then scrolling with the navigation keys.
Using the menus Example: Accessing the Voice mail menu. 1. Press the Menu soft key. 2. Press the 5 for Messages. 3. Press the 5 for Voice mail. List of menu functions Various menus let you check or change your phone settings.
Main menu 1. SAT (SIM Application Toolkit) page 91) 2. Call records 1. Missed calls 2. Received calls 3. Dialled calls 4. Delete all 5. Call time 1. Last call time 2. Total sent 3. Total received 4. Reset timers 6.
Using the menus 6. Cancel all 7. Change barring password 3. Call waiting 4. Network selection 5. Caller ID 6. Active line 4. Sound settings 1. Incoming calls 1. Default melodies 2. My sounds 3. Ring volume 4. Alert type 2.
3. Push messages 1. Inbox 2. Setting 3. Delete all 4. Preset messages 5. Voice mail 1. Connect to voice mail 2. Voice server number 6. Broadcast 1. Read 2. Receive 3. Channel 4. Language 7. Settings 1. Short messages 2.
Using the menus 7. Organiser 1. New memo 2. Calendar 3. To do list 4. Clock 1. Set time 2. Set date 3. Set world time 4. Set format 5. Alarm 6. Calculator 7. Conversion 1. Length 2. Weight 3. Volume 4.
3. Language 1. Text language 2. Input mode 4. Security 1. PIN check 2. Change PIN 3. Phone lock 4. Change password 5. Privacy 6. SIM lock 7. FDN mode 8. Change PIN2* 5. Auto redial 6. Voiceclarity 7. Slide down operation 8.
Phonebook menu Phonebook offers the following features: • Phonebook: allows you to find, create or set up the speed-dialling feature and manage Phonebook entries. • Management: allows you to create or remove your own number, set up caller groups and check the memory status.
Changing the phone memory entries Scroll to the category that you want to edit by pressing the Left or Right key. Following categories are available and you can edit information of each category by pressing the Options soft key. Category Then Mobile Select one of the following options.
Phonebook menu Changing the SIM memory entries To change the SIM memory entry’s information, press the Options soft key. The following options are available: Edit number This option allows you to change the number. You can also add a new number if none has been stored for the selected category.
Add entry You can store phone numbers and the corresponding names in the memory of your SIM card. In addition, you can store up to 1000 names in the phone memory and each name can be associated with up to five numbers. 1.
Phonebook menu 6. When you are satisfied, press the Ok soft key. 7. If you select Phone in step 3, go to step 8. If you select SIM in step 3, enter the location number and press the Ok soft key. 8.
3. Enter a phone number and press the Ok soft key. Or, To retrieve a number from your Phonebook, press the Phonebook soft key. Select an entry from the list and press the Ok soft key. Press the Ok soft key to save it. 4.
Phonebook menu Dialling a number stored in the SIM card Once you have stored phone numbers in your SIM card, you can dial them easily whenever required. To dial a number stored in the SIM card: 1. Enter the number of the SIM card location where the number you want to dial is stored.
Send all via infrared Via the infrared connection, you can send your Phonebook entries to another IrDA- compliant devices and vice versa. Note: This feature may not be available depending on the devices. Sending your phonebook 1. Align the IrDA ports on both sides each other. 2.
Phonebook menu Receiving phonebook from another device 1. Align the IrDA ports on both sides each other. 2. Access the Infrared activation menu (see page 182) and select On to activate the port. 3. When your phone receives Phonebook data from the other device: If the other person sends you one entry, your phone displays the name and the phone number...
Delete all You can delete Phonebook entries selectively depending on the memory location, or all entries at once. 1. Scroll to a desired memory selection and place a check mark ahead of it by pressing the Select soft key. Selecting All places check marks on all of the memories.
Phonebook menu Own number To store your own phone number(s) with a name: 1. Scroll to an empty location by pressing the Up or Down key and press the Select soft key. 2. When Edit number highlights, press the Select soft key.
Group setting You can change the settings of the ten predefined caller groups. 1. Select a caller group by pressing the Up or Down key and press the Select soft key. 2. Scroll to a setting option by pressing the Up or Down key and press the Select soft key.
Phonebook menu Memory status You can check how many names are stored in SIM card and phone’s memory. When you have finished, press the soft key or key to exit. Service directory Note: This feature may not be available depending on your SIM card.
SAT (SIM Application Toolkit) If you use a SAT card that provides additional services, the SAT menu displays. For further details, see your SIM card instructions. Shown only if it is supported by your SIM card.
Call records Via this menu, you can view the: • calls you missed, received or dialled. • cost of your calls. • length of your calls. Note: You can access the numbers in the three types of call records by pressing the Mode.
Call records By pressing the Options soft key, you can also: • delete the current call record from the list. • delete all of the calls. • paste the number into Phonebook. Dialled calls This option lets you view the last 20 dialled numbers.
Call records Call time This option lets you view the timers for calls made and received. Notes: • If your SIM card supports the ALS (Alternate Line Service) feature, you must first select the appropriate line. • The actual time invoiced for calls by your service provider may vary, depending on network features, rounding-off for billing purposes and others.
Call records The following options are available: Last call cost: cost of the last call made. Total cost: total cost of all calls made since the cost counter was last reset. If the total cost exceeds the maximum cost set via the Set max cost option, you can no longer make any calls until you reset the counter.
Network services These menu functions are network services. Please contact your service provider to check their availability and subscribe to them, if you wish. Call diverting Note: The call divert options may be different depending on your SIM card and those not supported by your network operator may not be shown.
• Data calls only (not available when line 2 is in use) Example: You can: • systematically divert fax calls to your office fax machine. • divert voice calls to your colleague if you are already using the phone. Setting call diverting options 1.
Network services Deactivating specific call diverting options 1. Select the call diverting option to be deactivated. 2. Select the type of calls to which this option applies. 3. Press the Remove soft key. The phone sends your settings to the network and displays the network’s acknowledgement.
Cancel all: all call barring options are deactivated; calls can be made and received normally. Change barring password: allows you to change barring password. You can specify individual call barring options for each of the following call types: • Voice calls only •...
Network services Deactivating specific call barring options 1. Select the call barring option to be deactivated. 2. Select the type of calls to which this option applies. 3. Press the Deactivate soft key. 4. Enter your call barring password supplied by your service provider.
Call waiting This network service informs you when someone is trying to reach you during another call. You can specify individual call waiting options for each of the following call types: • Voice calls only • Fax calls only (not available when line 2 is in use) •...
Network services Network selection The Network selection feature enables you to automatically or manually select the network used when roaming outside your home area. Note: You can select a network other than your home network only if it has a valid roaming agreement with your home network.
Network services Caller ID You can prevent your phone number from being displayed on the phone of the person being called. Note: Some networks do not allow the user to change this setting. The following options are available: Default: the default setting provided by the network is used.
Sound settings You can use the Sound settings feature to customise various settings, such as the: • ringtone, volume and type for incoming calls or messages. • sounds made when your call is connected or when you press a key. •...
Sound settings Ring volume: allows you to adjust the ring volume. Use the Up and Down keys or the volume keys on the left side of the phone. The more bars you see, the louder the volume. Alert type: lets you specify how you are informed of any incoming calls.
Sound settings Vibration: the phone vibrates but does not ring. Vibration then tone: the phone first vibrates and then starts ringing. Repetition: allows you to specify how often the phone informs you of a new message. You can choose either Once or Periodic. Power on/off This option allows you to select the melody that the phone sounds when you switch it on or off.
Sound settings Key tone This menu option allows you to select the tone that the keypad sounds when you press a dial key. To turn the sound off, select Off. To adjust the key tone volume, press the volume keys on the left side of the phone in Idle Mode. Minute minder This menu option allows you to specify whether or not the phone beeps every minute during a call to...
Sound settings Slider tone This menu allows you to select the slider tone that the phone sounds when you slide the folder up or down. To turn the sound off, select Off. Alerts on call This menu allows you to set the phone to all alerts while calling.
Messages This menu allows you to create, send, read and save messages with the Short Message Service (SMS: text message), Enhanced Message Service (EMS: message including simple image, animation or melody) and Multimedia Message Service (MMS: message supporting the presentation of various media types, such as full colour images and polyphonic ring tones).
Messages To read the new message(s) immediately, press the View soft key. The list of the messages appears. Note: To clear the new message notification on the display, press the have missed calls, voice mails, short messages or multimedia messages, and multi CBs, the right soft key indication changes in the following order: Missed, Connect, View, CB and Phonebook.
2. While entering your message, press the Options soft key to use the following options. • Send: allows you to send the message. Refer to the next step. • Text: allows you to format the text. Following text attributes can all be combined as required. Text size: Small/Medium/Large Text mode: Normal/Underscore/Strikethrough Bold: Off/On...
Messages 4. Enter a destination number on the Address screen. You can search for a number in Phonebook by pressing the Phonebook soft key. Note: To clear or clear all your input, press or press and hold the C key. When you have no input, press and hold the C key to move to the previous screen.
• message status; message to read or message. To view a message, scroll to it and press the Select soft key. The screen shows the: • date and time when the message was received. • memory where the message was stored; the SIM card or •...
Messages message into Media box. You can use these items when writing a message; for further details, see page 111. Transfer: allows you to transfer the message from the SIM card to the phone’s memory or vice versa. Outbox Outbox stores any messages that you have already sent or just saved without sending.
Cut address: extracts phone numbers, email addresses or URL addresses in the text, so that you can call the number or send a message to the number or save it in your Phonebook. Send: allows you to send the message to another person.
Messages Multimedia messages Multimedia Message Service (MMS) is a messaging service very similar to Short Message Service (SMS). It provides asynchronous delivery of personal multimedia messages from between phone and phone, phone and e-mail, phone and web(by URL). In addition to the familiar text content of text messages, multimedia messages can contain images, graphics, voice and sounds.
Notes: • while retrieving a new message, you cannot access WAP sites, and cannot also enter the Downloads menu (see page 146). • To clear the new message notification on the display, press the calls, voice mails, short messages or multimedia messages, and multi CBs, the right soft key indication changes in the following order: Missed, Connect, View, CB and Phonebook.
Messages Notes: • You can only receive up to 150 messages. • Multimedia message boxes, Camera, and Media box share a given amount of memory in your phone. You can also use the Delete or Delete all option to delete some sounds or images in Camera or Media box.
Item How to add Picture 3. Select one of pictures you want to add. The picture is displayed. (continued) 4. Press the Add soft key. To add a picture in the Media box; 1. Select one of the picture categories. The picture list of the category is displayed.
Messages Item How to add Sound To add a sound in the Media box; (continued) 1. Select one of the sound categories. 2. Select one of the sounds you want 3. Press the Select soft key to add it. 1. Enter a new message. Or you can Message 2.
• Add page: allows you to add up to 10 pages. You can move to each page using the Left or Right key on the message screen. • Page timing: allows you to set how long one page of the received messages displays. After a specified time, the display automatically scrolls to the next page.
Messages If it is not an empty entry, do the following things. Edit address: to edit the selected address. Delete address: to delete the selected address. Note: To clear or clear all your input, press or press and hold the C key. When you have no input, press and hold the C key to move to the previous screen.
Note: The icon of message status can have various forms like priority that sender fixed (see page 132). To view a message, scroll to it and press the Select soft key. But you cannot view the retrieving message. To scroll through the message contents, press the Up or Down key.
Messages Cut address: extracts phone numbers, email addresses or URL addresses in the text, so that you can call the number or send a message to the number or save it in your Phonebook. Properties: shows you detailed information about the message.
Messages To resend the message that you failed to send, scroll through and select the message by pressing the Up or Down key, and then press the Select soft key. Then press the Opt. soft key, and then select the Send option. To scroll through the message, press the Up or Down key.
Messages You can choose the following options by pressing the Opt. soft key: Send: replies to the sender by sending a message. Replay: replays the message. Delete: deletes the message. Properties: shows you detailed information about the message. My folder You can move the messages stored in the Inbox or Outbox to the My folder by using the Move to My folder option.
Delete all This menu option allows you to delete all of the messages in each message box. You can also delete all of your messages at one time. 1. Scroll to a message box and place a check mark ahead of it by pressing the Select soft key. Selecting All places check marks on all of the message boxes.
Messages Never: the push message never comes in. Optional: Only the push messages whose setting matches to the number in this option come in. The preset number is SMS service centre. You can also edit the number. Delete all: deletes all of the push messages. Preset messages Using this menu, you can preset up to nine messages that you use most frequently.
• In Idle Mode, hold the 1 key down to access your voice mail server and follow the instructions provided. • Call your voice mail server number by accessing the Connect to voice mail menu and follow the instructions provided. Voice server number Before using the voice mail service, you must store the voice mail server number obtained from your...
Messages • the message channel is currently active on the channel list. When you get broadcast messages, you can see the messages in Idle Mode. If it is short you can see the display, otherwise, press the CB soft key to read the message.
Messages To enable or disable this channel press the Select soft key, then select Enable or Disable. The Add channel option allows you to add a new channel to the channel list. Enter the appropriate channel code obtained from your service provider and a title for the channel.
Messages Delivery report: allows you to set on or off. When this function is set to on, the network informs you whether or not your message has been delivered. Character support: allows you to select the character set when editing and sending messages. GSM-alphabet: you can only send the message using GSM characters.
Messages Delivery report: when this option sets to On, the network informs you whether or not your message has been delivered. Read reply: when this option sets to On, your recipient’s phone sends a reply to let you know when your message was read by her/him. Receive settings: the following options are available: Msg.
Messages - Data call type: select a network connection type between ISDN and Analogue. - Dial number: enter the server phone number. - Login ID: enter the server login ID. - Password: enter the server password. • GPRS setting: allows you to change the proxy settings for the GPRS network.
Messages Memory status You can check the memory status for messages. Short messages You can check how many messages are stored in SIM card and phone’s memory. When you have finished, press the soft key or key to exit. Multimedia messages Multimedia message boxes, Camera and Media box share a given amount of memory in your phone.
Fun box The Fun box menu contains several fun options: • WWW services • Media box • JAVA world WWW services Your phone comes equipped with a WAP (Wireless Application Protocol) Browser, making it possible for you to access the Wireless Web. Each time you start the WAP Browser, the phone connects to the Wireless Web and the service indicator icon (...
Note: To quickly launch the WAP browser from Idle Mode, press the To scroll through the screen, use the Up and Down keys. To exit the browser, press the time. The phone returns to Idle Mode. Navigating the wap browser scroll through and select browser items...
Fun box Using the WAP browser menus There are various menu options available when surfing the Wireless Web. To access the WAP Browser menu: 1. Press the left of all WAP pages and then press the key. A list of options appears. 2.
Goto URL: allows you to manually enter the URL address of the site that you wish to access. Bookmark: allows you to use the Bookmark menu option. For details, see page 139. Messages: allows you to read or write an SMS message.
Fun box Once you have stored an address, the following options are available when you select it. Go: allows you to access the site directly. Edit: allows you to change the name and URL address of the bookmark. Delete: allows you to delete the bookmark. Go to URL This menu option allows you to manually enter the URL address of the Web site that you wish to...
Fun box For each proxy, the following options are available: Proxy name: enter the name of the HTTP proxy server. GSM setting: you can change the proxy settings for the GSM network. Gateway: enter the IP Address and IP Port Data call type: select a network connection type;...
Fun box GPRS first: your phone will search for the GPRS network first. If this service is not available, you can set the GSM service temporarily. GPRS only: the phone only works in GPRS networks. GSM only: the phone only works in GSM networks. Current proxy This menu option allows you to activate one of the proxies you set up to use the WAP connection.
Fun box Move to album: allows you to move it to one of the albums. Set as: allows you to set it as a wallpaper or a caller ID. Wallpaper: allows you to set it as a wallpaper. Caller ID: allows you to set it as a caller ID. Protection: allows you to protect it from deletion or not.
Fun box For further details about these options, see the options of the Photos menu (see page 142). Delete all This option deletes all of the photos, images and sounds in the Media box. Photos 1. Scroll to a box and place a check mark ahead it by pressing the Select soft key.
Sounds 1. Scroll to a sound box and place a check mark ahead it by pressing the Select soft key. Selecting All places check marks on all of the boxes. 2. If necessary, repeat step 1 to check another box. 3.
Fun box JAVA world You can download MIDlets (Java applications running on mobile phones) from various sources using the WAP Browser and store them in your phone. Downloads A list of Java games is displayed. In basic, two pre- loaded MIDlets (Java games) are provided. If the list of Java games is empty, a pop up message is displayed to invite to download a new game.
Fun box Play: allows you to start a new game or a saved game. Saved game allows you to continue the beginning of last stage you played. Instructions: shows you the explanation of control keys, offense items and defense items. Configuration: allows you to turn the sound, vibration on or off and select the game speed from 1 to 5.
Fun box Level 1: Aurora, all enemies are hit by a snowball. Level 2: Ice dragon, all enemies are hit by a snowball and frozen for 8 seconds. Level 3: Icicle storm, double powered snowball attack to all enemies and decreasing enemies’ attack accuracy for 10 seconds.
Fun box Playing a game Your score goes up when you remove the bubbles. Only when more than 3 same coloured bubbles line up horizontally or diagonally, they disappear. To line up the bubbles, move the band rounding three bubbles to suitable place and rotate it. When the game is over, your score is ranked on the high score board if it is within third.
Fun box server is automatically set when making data call set up. Memory status You can check the free space for Java download. The display also shows the total memory and used memory.
Organiser The Organiser feature enables you to: • view the calendar and/or write a memo or to do list. • set the current date and time, and find out what time it is in various cities around the world. • set the alarm so that the phone rings at a specific time.
Organiser • Anniversary: anniversaries to be remembered, such as wedding anniversaries, birthdays or other special days. Note: You can save up to 25 items to each category, so you can save 100 memos totally. 3. Scroll to a date on the calendar by pressing the navigation keys.
10. You can choose the following option by pressing the Options soft key: • Add: allows you to add a new memo on the day. • Delete: allows you to delete the memo. • Edit: allows you to edit the memo. •...
Organiser The following options are available when you press the Options soft key on the Calendar display: Add memo: allows you to add a new memo on the day. Go to date: allows you to enter a particular date and then schedule an event on that date. View all: shows all of the events that you have scheduled.
4. Follow the procedure from step 4 on page 152 onwards to save the memo. Viewing your calendar memos A date that has a memo associated with it is highlighted in a red box. If you select a date when events have already been scheduled, the number of memos of each type is shown at the bottom of the calendar.
Organiser To do list This menu allows you to view a list of tasks. To create a new memo of the To do list type: 1. Write the memo about your task and press the Ok soft key. For more information about how to enter characters, see page 45.
Copy: allows you to copy the task to a different date. Delete: allows you to delete the task. Delete all: allows you to delete all of tasks from the list. Clock This option allows you to change the current time and date displayed.
Organiser To select your time zone: 1. Select the city corresponding to your time zone by pressing the Left or Right key one or more times. The local date and time display. 2. Press the Set soft key. 3. To update the current date/time with this new setting...
Alarm This option allows you to set an alarm to ring at a specific time. You can set up to three alarms or set the phone to ring an alarm when it is switched off. To set an alarm: 1. Select either Morning call, Alarm1 or Alarm2 by pressing the Up or Down key.
Organiser 6. When you have finished, press the key to exit. Once an alarm has been set, you can see the Alarm icon ( ) on the top line of the display. To stop the alarm when it rings, press any key. Note: When the Quiet Mode is activated, the alarm tone doesn’t sound.
The snooze alarm tone sounds while the phone is switched off and the Auto power is set to on, and the Quiet Mode is activated. If you reset the moring call’s alarm time or deactivate the morning call’s alarm, the snooze alarm is cancelled. Calculator You can use the phone as a calculator.
Organiser Conversion This menu option allows you to convert from one type of unit to another. To convert a value: 1. Scroll to the type of conversion to be performed from Length, Weight, Volume, Area and Temperature, and press the Select soft key. 2.
Units available Type Length Weight Volume Area Temperature Timer Using the Timer feature, you can set the phone to sound an alarm after a certain time. 1. Press the Set soft key. 2. Enter the length of time you want to count down in hours and minutes and press the Ok soft key.
Organiser To stop the timer melody when it rings, press any key. To stop the timer before the end, press the Stop soft key on the Timer screen. Notes: • The timer uses power from the battery consequently, the phone’s operating time is reduced. •...
Camera Using the camera module embedded in your phone, you can take pictures for people or events while on the move. Additionally, you can send photos to other people in a picture message or as an e-mail attachment. The camera produces JPEG pictures. CAUTIONS: •...
Camera The icons on the top line of the display indicate the size, quality, flash type and current mode (shown if you select the multi-shot mode or night mode). 3. Adjust the image by aiming the camera to the subject. adjust the brightness of the picture zoom in or out the...
switch the camera flash on or off (if you set the Manual option in the Flash light menu. See page 170, 173) For more information about these functions, see “Using the camera options” on page 168. 4. Press the the right side of the phone to take a picture. The picture is automatically saved in the My photos (see page 171).
Camera Go to my photos: allows you to see the taken pictures in the My photos (see page 171). Set as: allows you to set it as a wallpaper or a caller ID. Wallpaper: allows you to set it as a wallpaper. Caller ID: allows you to set it as a caller ID.
Camera Night mode: this option allows you to take a picture of the best quality when it is dark. Capture only: you can take pictures without review. Frame: this option allows you to use a frame on the picture. Press the navigation key to find the frame format you want to use.
Camera Photo quality: allows you to select the image quality from Super fine, Fine, Normal, and Economy. The option you select appears on the top of the display. Shutter sound: allows you to select a sound when you press the shutter, the Camera ( ) key on the right side of the phone.
My photos In this menu, you can review the pictures you have taken. scroll through the pictures show the selected picture as an enlargement go back to the multiple view mode use the options turn the camera off and return to Idle Mode My albums My Album allows you to store the pictures as your photo album.
Camera Delete all You can delete all the photos saved in each category. 1. Scroll to a photo box and place a check mark ahead it by pressing the Select soft key. Selecting All places check marks on all of the photo boxes.
Camera Photo quality: allows you to select the image quality from Super fine, Fine, Normal, and Economy. The option you select appears on the top of the display. Shutter sound: allows you to select a sound when you press the shutter, the soft key or the Camera ( ) key on the right side of the phone.
Phone settings Many different features of your phone can be customised to suit your preferences via the Phone settings menu. Display You can change the background image and the colour of the components on the display according to your preference and needs. Wallpaper This option allows you to change the background image to be displayed in Idle Mode.
Text style: allows you to set the style of the text displayed on the idle screen. Note: When you set the wallpaper image to Calendar, the Text position and Text style options don’t work. Skin You can change the colour setting of the display components, such as soft key indications area or the menu names and icons.
Phone settings Greeting message This menu option allows you to set a greeting message to be displayed briefly when the phone is switched on. When you access this menu, the current message displays. clear the existing message enter a new message save your input cancel your input...
Phone settings Security The security settings enable you to restrict the use of your phone to the people and types of calls of your choice. Various codes and passwords are used to protect the features of your phone. For more information, see page 189 -191.
Phone settings Phone lock When the Phone lock feature is enabled, the phone is locked and you must enter the 8-digit phone password each time the phone is switched on. The password is preset to “00000000” at the factory. To change the phone password, see the Change password menu option below.
Phone settings SIM lock To enable the SIM lock feature, you must enter a new four- to eight-digit SIM lock code, and confirm it by entering it again. The following options are available: Disable: you can use any other SIM cards with your phone.
Phone settings Once you have entered a new PIN2, you are asked to confirm it by entering it again. Note: Not all SIM cards have a PIN2. If your SIM card does not, this menu option is not displayed. Auto redial With the Auto Redial function, the phone makes up to ten attempts to redial a phone number after an unsuccessful call.
Phone settings Slide down operation You can select the phone’s action when you slide the folder down. Stop operation: when you slide the folder down, the phone stops the current operation and locks the keypad automatically. Continue operation: when you slide the folder down, the phone performs the current operation continuously.
You can use your phone as a modem for faxing when it is connected to computing devices. You need to purchase a data kit from your local Samsung dealer. In this menu, you can enable the fax mode on your phone.
If there is no communication between your phone and the IrDA-compliant device within 1 minute of activating the feature, it is automatically deactivated. Reset settings This menu option allows you to reset your phone to its default configuration. You can reset the sound settings, phone settings or all of the settings together.
Using ALS (Alternate Line Service) The ALS feature enables two lines to be associated with one SIM card. Consequently, you can make and receive calls on either line. If you subscribe to this network service, a few additional menu options enable you to set up this feature.
Using ALS (Alternate Line Service) Setting call diverting options You can set up call diverting via the Call diverting menu option. This service reroutes incoming calls on the line of your choice to a specified number. For further details, see page 96. Viewing call information You can view call times and last call cost information for each line.
Solving problems Before contacting the after-sales service, perform the following simple checks. They may save you the time and expense of an unnecessary service call. When you switch your phone on, the following messages may appear No SIM card Check that the SIM card is correctly installed. Phone locked Enter password The Phone lock feature is enabled.
“No service” displays • The network connection was lost. You may be in a weak reception area (in a tunnel or surrounded by buildings). Move and try again. • You are trying to access an option for which you have not taken out a subscription with your service provider.
If the above guidelines do not help you to solve the problem, take a note of: • the model and serial numbers of your phone • your warranty details • a clear description of the problem Then contact your local dealer or Samsung after-sales service. ) to weak (...
Access codes There are several access codes that are used by your phone and its SIM card. These codes help you protect the phone against unauthorised use. Some access codes can be changed using the Security menu option. See page 177 for further details.
Access codes PIN2 The PIN2, supplied with some SIM cards, is required to access some functions, such as charging unit counters. These functions are only available if supported by your SIM card. If you key in an incorrect PIN2 three times in succession, key in the PUK2 and press the Ok soft key to unlock the phone.
Access codes You cannot change the PUK2. If you lose the code, contact your service provider. Call barring password The 4-digit call barring password is required when you use the Call Barring function. You obtain the password from your service provider when you subscribe to this function.
Health and safety information SAR certification information This phone meets European Union (EU) requirements concerning exposure to radio waves. Your mobile phone is a radio transmitter and receiver. It is designed and manufactured, so as not to exceed the limits for exposure to radio-frequency (RF) energy, as recommended by the EU Council.
SAR tests are conducted using standard operating positions with the phone transmitting at its highest certified power level in all tested frequency bands. Although the SAR is determined at the highest certified power level, the actual SAR level of the phone while operating can be well below the maximum value.
Health and safety information • If left unused, a fully charged battery will discharge itself over time. • Use only Samsung-approved batteries and recharge your battery only with Samsung- approved chargers. When a charger is not in use, disconnect it from the power source. Do not leave the battery connected to a charger for more than a week, since overcharging may shorten its life.
Health and safety information Road safety Your wireless phone gives you the powerful ability to communicate by voice, almost anywhere, anytime. But an important responsibility accompanies the benefits of wireless phones, one that every user must uphold. When driving a car, driving is your first responsibility.
Health and safety information Electronic devices Most modern electronic equipment is shielded from radio frequency (RF) signals. However, certain electronic equipment may not be shielded against the RF signals from your wireless phone. Consult the manufacturer to discuss alternatives. Pacemakers Pacemaker manufacturers recommend that a minimum distance of 15 cm (6 inches) be maintained between a wireless phone and a...
Health and safety information Other medical devices If you use any other personal medical devices, consult the manufacturer of your device to determine if it is adequately shielded from external RF energy. Your physician may be able to assist you in obtaining this information.
Health and safety information Potentially explosive atmospheres Switch off your phone when in any area with a potentially explosive atmosphere and obey all signs and instructions. Sparks in such areas could cause an explosion or fire resulting in bodily injury or even death.
be possible on all wireless phone networks or when certain network services and/or phone features are in use. Check with local service providers. To make an emergency call, proceed as follows. 1. If the phone is not on, switch it on. 2.
Health and safety information • Do not store or carry flammable liquids, gases or explosive materials in the same compartment as the phone, its parts or accessories. • For vehicles equipped with an air bag, remember that an air bag inflates with great force. Do not place objects, including both installed or portable wireless equipment in the area over the air bag or in the air bag deployment area.
• Do not store the phone in cold areas. When the phone warms up to its normal operating temperature, moisture can form inside the phone, which may damage the phone’s electronic circuit boards. • Do not drop, knock or shake the phone. Rough handling can break internal circuit boards.
Glossary To help you understand the main technical terms and abbreviations used in this booklet and take full advantage of the features of your mobile phone, here are a few definitions. ALS (Alternate Line Service) Capability of associating two lines with one SIM card.
Glossary EMS (Enhanced Message Service) Network service sending and receiving messages that include images, sounds and animations to and from another user without having to speak to the correspondent. GPRS (General Packet Radio Service) New non-voice value-added service that allows information to be sent and received across a mobile telephone network.
Glossary users, MMS is similar to Short Message Service (SMS)-it provides automatic, immediate delivery of user-created content from phone to phone. The message addressing used is primarily phone numbers, thus the traffic goes from phone to phone. MMS also provides support for e-mail addressing, so that messages can also be sent by e-mail.
SDN (Service Dialling Numbers) Telephone numbers supplied by your network provider and giving access to special services, such as voice mail, directory inquiries, customer support and emergency services. SIM (Subscriber Identification Module) Card containing a chip with all the information required to operate the phone (network and memory information, as well as the subscriber’s personal data).
Index ABC mode • 45, 67 Access codes • 189 Accessories • 13 Active line select • 103 service, use • 184 Alarm, set • 159 Alert type • 105 ALS • 184 Autopower alarm • 160 background image, set • 174 Backlight •...
FDN mode • 179 Fixed Dial Number mode • Fun box • 136 Functions, select • 28 Greeting message • 176 Group settings • 89 Icons • 18 Inbox • 112 Input mode changing • 46 language, set • 176 International calls •...
Index mode • 45, 70 speed-dial • 82 storing • 81 Options, select • 28 Organiser • 151 Outbox • 114, 124 Password barring • 100, 191 phone • 178, 189 Personal Identification Number • 189 Phone layout • 14 settings •...
Switching on/off microphone • 36 phone • 27 Symbolic mode • 46, 69 T9 mode • 45, 64 Text entering • 45 input modes • 45 language • 176 Time setting • 157 world • 157 Timer • 163 To do list • 156 Tone connection •...