Download Print this page
King Canada 8010L Instruction Manual

King Canada 8010L Instruction Manual

12v li-ion cordless drill kit

Advertisement

Quick Links

12V LI-ION CORDLESS DRILL KIT
MODEL: 8010L
INSTRUCTION MANUAL
COPYRIGHT © 2011 ALL RIGHTS RESERVED BY KING CANADA TOOLS INC.
performance
performance
plus
plus
WARRANTY INFORMATION
2-YEAR
LIMITED WARRANTY
FOR THIS 12V LI-ION DRILL
PROOF OF PURCHASE
Please keep your dated proof of purchase for warranty and servicing purposes.
LIMITED TOOL WARRANTY
King Canada makes every effort to ensure that this product meets high quality and
durability standards. King Canada warrants to the original retail consumer a 2-year
limited warranty as of the date the product was purchased at retail and that each
product is free from defects in materials. Warranty does not apply to defects due
directly or indirectly to misuse, abuse, normal wear and tear, negligence or
accidents, repairs done by an unauthorized service center, alterations and lack of
maintenance. King Canada shall in no event be liable for death, injuries to persons
or property or for incidental, special or consequential damages arising from the use
of our products.
To take advantage of this limited warranty, return the product at your expense
together with your dated proof of purshase to an authorized King Canada service
center. Contact your retailer or visit our web site at www.kingcanada.com for an
updated listing of our authorized service centers. In cooperation with our authorized
serviced center, King Canada will either repair or replace the product if any part or
parts covered under this warranty which examination proves to be defective in
workmanship or material during the warranty period.
NOTE TO USER
This instruction manual is meant to serve as a guide only. Specifications and
references are subject to change without prior notice.
PARTS DIAGRAM & PARTS LISTS
Refer to the Parts section of the King Canada web site for the most updated parts
diagram and parts list.
KING CANADA INC. DORVAL, QUÉBEC, CANADA H9P 2Y4
www.kingcanada.com
KING CANADA TOOLS
OFFERS A 2-YEAR LIMITED WARRANTY
FOR NON-COMMERCIAL USE.

Advertisement

loading

Summary of Contents for King Canada 8010L

  • Page 1 This instruction manual is meant to serve as a guide only. Specifications and references are subject to change without prior notice. PARTS DIAGRAM & PARTS LISTS Refer to the Parts section of the King Canada web site for the most updated parts diagram and parts list. performance...
  • Page 2 GENERAL & SPECIFIC LITHIUM-ION BATTERY & SAFETY INSTRUCTIONS CHARGER INFORMATION 1. KNOW YOUR TOOL WARNING: The warnings, cautions, and instructions discussed in this instruction manual Read and understand the instruction manual and labels affixed to the tool. Learn its cannot cover all possible conditions and situations that may occur. It must be understood application and limitations as well as its specific potential hazards.
  • Page 3: Getting To Know Your Tool

    (with the chuck pointing away from Figure 4 you) move the lever to the left. For reverse rotation move Model ........................8010L the lever to the right. To lock the trigger, place the lever in the center position. Voltage..........................12V Battery type ....................1300m/Ah (li-ion)
  • Page 4 OPERATION OPERATION Adjustable torque settings Operational steps-drilling Your cordless drill features 17+1 torque settings for When drilling metal, it is recommended to use a light oil on the drill bit to keep it from driving different types of screws into different types of overheating.
  • Page 5: Operation And Maintenance

    WARNING: THERE ARE NO USER SERVICE-ABLE PARTS INSIDE Preventative maintance performed by an unauthorized personnel may result in the misplacement of internal wires and componenets which could cause serious hazards. We recommend that all servicing be performed by a qualified KING CANADA service centre technician. Battery Pay attention to the battery power levels as the battery nears its end of life.
  • Page 6: Warranty Information

    This instruction manual is meant to serve as a guide only. Specifications and references are subject to change without prior notice. PARTS DIAGRAM & PARTS LISTS Refer to the Parts section of the King Canada web site for the most updated parts diagram and parts list. performance...
  • Page 7 LITHIUM-ION BATTERY & GENERAL & SPECIFIC CHARGER INFORMATION SAFETY INSTRUCTIONS 1. KNOW YOUR TOOL WARNING: The warnings, cautions, and instructions discussed in this instruction manual Read and understand the instruction manual and labels affixed to the tool. Learn its cannot cover all possible conditions and situations that may occur. It must be understood application and limitations as well as its specific potential hazards.
  • Page 8 GETTING TO KNOW YOUR TOOL OPERATION Using your 12V Li-ion cordless impact driver WARNING: Do not install battery until the accessory is installed securely to the tool. Charging the battery To charge the battery (A) Fig.2, plug charger (B) power cord into a 120V AC receptacle (do not use extension cord).
  • Page 9 WARNING: THERE ARE NO USER SERVICE-ABLE PARTS INSIDE Preventative maintance performed by an unauthorized personnel may result in the misplacement of internal wires and componenets which could cause serious hazards. We recommend that all servicing be performed by a qualified KING CANADA service centre technician. Battery Pay attention to the battery power levels as the battery nears its end of life.