Electrolux ERN3314AOW User Manual page 34

34 www.electrolux.com
If necessary cut the adhesive sealing strip
and then apply it to the appliance as
shown in figure.
x
x
Drill the appliance using a Ø 2.5 mm drill
13 mm (10 mm max. penetration).
Fix the square fitting to the appliance.
1
Ø 2.5 mm
2
3
Install the appliance in the niche.
Push the appliance in the direction of the
arrow (1) until the upper gap cover stops
against the kitchen furniture.
Push the appliance in the direction of the
arrow (2) against the cupboard on the op-
posite side of the hinge.
2
1