Rehingeing The Door - AEG SANTO Operating Instructions Manual

Automatic refrigerator
Table of Contents

Advertisement

Reversing the door
The side at which the door opens can be changed from the right side
(as supplied) to the left side, if the installation site requires.
Warning! When changing the side at which the door opens, the appli-
ance must not be connected to the mains. Remove plug from the
mains beforehand.
Tilt the appliance slightly towards
the rear and prop it securely.
Unscrew the door hinge screws (K)
and remove the hinge pin bracket
(1).
Open the door a little way and take
it out downwards.
Unscrew the upper pin (A) and screw
it into place on the opposite side.
Fit the door into the upper pin (A)
and close it.
Screw the hinge pin bracket (1)
securely into place on the opposite
side using the screws (K).
Unscrew the handle. Refit it on the
opposite side after having pushed in
the plugs with a punch. Cover the
holes left open with the plugs con-
tained in the documentation pack.
54
AEG97
12
A
AEG98
1
K

Advertisement

Table of Contents
loading

Table of Contents