Changing Over The Freezer Compartment Door; Prior To Initial Start-Up - AEG Santo 1450-7 TK Operating Instructions Manual

Changing over the freezer compartment door

Open the freezer compartment door a little way.
Using a small screwdriver, press the spring
in the opening of the lower door bearing
slightly upwards and take the door bearing
out complete with the door.
Position the covering cap (M) on
the opposite side.
Turn the freezer compartment door
through 180° and fit the lower door
bearing into the lower bearing
cavity of the freezer compartment
door.
Lift the freezer compartment door
a little way upwards, fit it into the
upper door bearing, and at the
same time insert the lower door bearing into the square hole.
Small upwards and downwards adjustments of the freezer
compartment door will make fitting easier.
Prior to Initial Start–Up
Please clean the appliance interior and all accessories prior to initial
start-up (see section: "Cleaning and Care").
10
M
AEG43