Breville Smart Oven BOV860 Instruction Book page 16

START/CANCEL
9. At the end of the PIZZA cycle, the oven alert
will sound. The START/CANCEL button
backlight will go out and the LCD screen
will illuminate blue.
NOTE
If using the included pizza pan, place it in
the oven during the preheating cycle for
the best result. Carefully place pizza on the
heated pizza pan.
A note on pizza stones
When using a pizza stone, it is necessary to
preheat the stone, without a pizza, for optimum
results.
1. Insert the wire rack, with the spokes facing
upward, into the middle rack height position.
2. Place pizza stone on the center of the wire
rack so air will flow around all sides of
the stone.
3. Close the door and proceed according to
PIZZA function instructions.
REHEAT FUNCTION
The REHEAT function is ideal for gently
reheating leftovers without browning or drying
them out.
1. Insert the wire rack into a rack position that
best suits the type of food you are reheating.
2. Place food, positioned on the included
roasting pan, pizza pan or other oven-proof
dish, on the center of the wire rack so air will
flow around all sides of the food.
3. Close the oven door.
16
4. Turn the FUNCTION dial until the
indicator on the LCD screen reaches the
REHEAT function. The top figure on the
LCD screen indicates the preset REHEAT
temperature of 165°C while the bottom
figure indicates the preset time of ':15
MINS'. The preset CONVECTION setting
will also be displayed.
5. The reheating temperature, time,
convection and frozen settings can be
adjusted before or during the reheating
cycle.
a) The reheating temperature is displayed
as the top figure on the LCD screen. Turn
the TEMPERATURE dial to adjust the
temperature from 50°C to a maximum of
230°C.
b) The reheating time is displayed as the
bottom figure on the LCD screen. Turn the
TIME dial to adjust the time up to 2 hours.
6. Press the START/CANCEL button to
activate the REHEAT function. The button
backlight will illuminate red, the oven
alert will sound and the LCD screen will
illuminate orange.
7. The timer will be displayed and begin to
count down. The temperature and time
can be adjusted during the reheating
cycle by turning the corresponding
TEMPERATURE and TIME dial. The cycle
can be stopped at any time by pressing the
START/CANCEL button.
8. At the end of the REHEAT cycle, the oven
alert will sound. The START/CANCEL
button backlight will go out and the LCD
screen will illuminate blue.