Advertisement
DELUXE ECM SPEED CONTROLLER
PRODUCT OVERVIEW
Low Voltage Wiring
The Price Deluxe ECM speed controller works with a high efficiency ECM motor. This low voltage (24VAC) speed
control allows full manual (push button adjust) or BAS (2-10VDC signal) control of the ECM motor.
NOTE:
24VAC COM, BAS COM, ANALOG OUTPUT COM are all connected together. Please observe 24VAC polarity
BACK OF ECMDX
BAS Input Signal
The BAS input signal overrides the local setpoint using a remote 0 – 10VDC signal. If the BAS signal drops below 1VDC local
control (via the push buttons) is restored.
BAS Voltage
0-1VDC
Local Control mode using push buttons
1-2VDC
Motor Off
2-9VDC
Modulating Control
9-10VDC
Maximum Speed
2
DELUXE ECM SPEED CONTROLLER - Manual | priceindustries.com
Response
Local setpoint can be adjusted from 0 – 100 (%) using push
buttons
Recommend sending a 1.5VDC signal to command motor off
2 – 9VDC modulates motor from 0-100%
Motor is running at maximum speed. (100%)
Notes
Advertisement
