DeWalt DW080LRS User Manual page 21

Detector Makes no Sound
1. Make sure the detector is on.
2. Press the volume button (Figure
Make sure the speaker icon appears with two half circles (Figure
3.
Make sure the rotary laser is spinning and that it is emitting a laser beam.
4.
If the detector is still not making any sound, take it to a DeWALT service
center.
Detector Emits Sound but Does Not Display
1. If the detector is very cold, allow it to warm up in a heated area.
2.
If the LCD display window is still not functioning, take the detector to a
DeWALT service center.
Service and Repairs
Laser Service
Note: Disassembling the laser level will void all warranties on the product.
To assure product SAFETY and RELIABILITY, repairs, maintenance and
adjustment should be performed by authorized service centers. Service or
maintenance performed by unqualified personnel may result in a risk of injury. To
WALT service center, go to http://www.D
locate your nearest D
E
Detector Service
Except for batteries, there are no user serviceable parts in the Digital Laser
Detector. Do not disassemble the unit. Unauth orized tampering with the laser
detector will void all warranties.
). It will toggle from high, to low, to mute.
F 4
F 10
WALT.com.
E
Laser Specifications
Laser Wavelength
).
Laser Power/Class
Rotation Speed
Self-Leveling Range
Indoor Visibile Range
Range with Detector
Leveling Accuracy @
600 RPM*
Power Source
Operating
Temperature
Storage Temperature
Environmental
* Standard ambient conditions per MIL-STD-810G.
Detector Specifications
Accuracy - High
Accuracy - Low
Power Source
Environmental
DW080LRS DW080LGS
630-680nm 515-530nm
630-680nm
≤ 5mw /CLASS 3R
150, 300, 600, 1200 RPM
± 5°
200' (60m) diameter 250' (80m) diameter
2000' (600m) diameter
± 1/16" per 100'
(± 1.5mm per 30m)
20V D WALT battery
e
14°F to 122°F
(-10°C to 50°C)
-4°F to 158°F
(-20°C to 70°C)
Water & Dust Resistant to
±1mm @ 30m
±2mm @ 30m
Mini USB DC 5V
Water & Dust Resistant to
E
IP67
IP54
21